Knowlegable Electronic Eng.
after reading the information on the Lipro battery charge controller ca the charge controller be used for a hand cranked generator. It seems to fallow the same format in that the generator may fluxuate in voltage output but will provide a sum what steady output.
powering a Lipro charge controller by a hand cranked generator
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- joel neumann
- Posts: 1
- Joined: Sat Jul 20, 2013 11:27 am
- john444
- Posts: 443
- Joined: Sun Mar 04, 2012 2:42 pm
Re: powering a Lipro charge controller by a hand cranked generator
Hi Joel,
As long as you don't let the input voltage go over 6-V,
It should work great.
It will take a lot of cranking though.
Good luck, John
As long as you don't let the input voltage go over 6-V,
It should work great.
It will take a lot of cranking though.
Good luck, John
Please be positive and constructive with your questions and comments.