hi first i buy 100 neo pixels and after some days i buy more 400 pixels the first 100 pixel strip is running fine but i want to make 150 pixels strip when i mix that 400 pixels i buy 2nd time i dont why the strip is having problem the strips is blinking and the pixels getting die one by one can you please help me why is this happening ?
i mean to say why i am not able to mix the new pixels with the old one the pixels are same flora neo pixels v 2
problem in neopixels
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: problem in neopixels
How are you powering the strip of pixels?
- skelhoney
- Posts: 48
- Joined: Fri Jun 14, 2013 3:04 pm
Re: problem in neopixels
i am using this battery in the link below
http://www.adafruit.com/products/354
and using 3 core wire not with conductive thread
Thanks
http://www.adafruit.com/products/354
and using 3 core wire not with conductive thread
Thanks
- pburgess
- Posts: 4161
- Joined: Sun Oct 26, 2008 2:29 am
Re: problem in neopixels
If you can take a photo that clearly shows the parts and the connections between them, this will help us to diagnose the problem.
-
- Posts: 10
- Joined: Wed Nov 13, 2013 3:54 am
Re: problem in neopixels
You might just need more power, or less pixels. It would help to see a photo of how you're powering the strip.
Powering neopixels: http://learn.adafruit.com/adafruit-neop ... uide/power
Powering neopixels: http://learn.adafruit.com/adafruit-neop ... uide/power
Please be positive and constructive with your questions and comments.