error message on start x with occidentalis 2.0

Post test messages here

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
christrabin
 
Posts: 2
Joined: Tue May 27, 2014 3:25 pm

error message on start x with occidentalis 2.0

Post by christrabin »

hi

Fisrt, sorry i do some error with english word or grammary, i don't use it since a long time ago

i have a rapsberry connect with a arduino and a slice of pi connect on xrf v2.1 radio

all was ok i tied to install i2c communication beetween the arduino with 2 sensors dth11 and a mg811.

i put a level converter from adafuit beetween the pi and the arduino. after some test to do a connection, i reboot with no problem i made a copy of my sd.

The next boot, i'm no problem to log on the shell no errors are display but when i start lxde, i have a message or a freeze .

all my copies do the same thing so i am ;-(((((((((((((((((((

this is the error message :
login as: pi
[email protected]'s password:
Linux raspberrypi 3.10.25+ #622 PREEMPT Fri Jan 3 18:41:00 GMT 2014 armv6l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.

Type 'startx' to launch a graphical session

Last login: Sat Sep 1 07:09:12 2012 from bunpo-pc.mshome.net
pi@raspberrypi ~ $ startx


X.Org X Server 1.12.4
Release Date: 2012-08-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.2.0-2-mx5 armv7l Debian
Current Operating System: Linux raspberrypi 3.10.25+ #622 PREEMPT Fri Jan 3 18:41:00 GMT 2014 armv6l
Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1600 bcm2708_fb.fbheight=900 bcm2708.boardrev=0xe bcm2708.serial=0x55c99c31 smsc95xx.macaddr=B8:27:EB:C9:9C:31 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait
Build Date: 18 December 2013 05:20:52PM
xorg-server 2:1.12.4-6+deb7u2 (Julien Cristau <[email protected]>)
Current version of pixman: 0.29.3
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 1 07:16:18 2012
(==) Using default built-in configuration (12 lines)
i try some google seach by nothing help. have an idea to reapair x session?

christ

User avatar
adafruit_support_mike
 
Posts: 67446
Joined: Thu Feb 11, 2010 2:51 pm

Re: error message on start x with occidentalis 2.0

Post by adafruit_support_mike »

The text you posted doesn't contain an error message.. just the usual things an X server says as it starts up.

Double-check your connection between your RasPi and display. The problem may be as simple as a loose cable.

christrabin
 
Posts: 2
Joined: Tue May 27, 2014 3:25 pm

Re: error message on start x with occidentalis 2.0

Post by christrabin »

hi

no problem from the cable. it do the same thing by a putty connection

Locked
Please be positive and constructive with your questions and comments.

Return to “Test Message Forum (closed)”