Do you happen to have a datasheet for the panel mount USB cable, item #936. I'd like to see the datasheet in order to know the panel cutout dimensions and screw hole placements guidelines.
Thanks!!
Item# 936 datasheet
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_mike
- Posts: 67454
- Joined: Thu Feb 11, 2010 2:51 pm
Re: Item# 936 datasheet
We usually post any documentation we have ourselves, so I doubt we have a datasheet or mechanical drawings.
- Franklin97355
- Posts: 23912
- Joined: Mon Apr 21, 2008 2:33 pm
Re: Item# 936 datasheet
From the product page. I would measure the opening on a piece of equipment you have with a USB jack for the cutout dimensions.The jack half has two mounting 'ears' with M3 screws installed, 30mm apart. The ears are flexible so the holes don't have to drilled very precisely.
- aiw
- Posts: 20
- Joined: Sat Aug 18, 2012 6:52 am
Re: Item# 936 datasheet
Here is a dimensional drawing for the same type of unit I found elsewhere in case anyone needs the dimensions for a panel.
http://datapro.net/drawings/cutouts/usb-b_cutout.pdf
http://datapro.net/drawings/cutouts/usb-b_cutout.pdf
Please be positive and constructive with your questions and comments.