Using Windows 7
Using USB cable 'USB-RS232' from adafruit
MiniPov3 lite up in sequence as stated in the instructions (adafruit site) after assemble
Getting error running "make program-minipov'
I followed all the adafruit instructions and when running the make program-minipov I recieved the following error. Not knowing what to do I answered yes and got another error - so I answered yes to the rest. Got the same error everytime. I'm at a lost as what to do next. I've searched the forum. Looked in the make file and while I saw the lfuse I'm not sure what to change, additionally I didn't see hfuse nor efuse
Code: Select all
avrdude: verifying ...
avrdude: verification error, first mismatch at byte 0x0000
0x12 != 0x00
avrdude: verification error; content mismatch
avrdude: safemode: lfuse changed! Was e4, and is now 0
Would you like this fuse to be changed back? [y/n] y
avrdude: and COULD NOT be changed
avrdude: safemode: hfuse changed! Was df, and is now 0
Would you like this fuse to be changed back? [y/n] y
avrdude: and COULD NOT be changed
avrdude: safemode: efuse changed! Was ff, and is now 0
Would you like this fuse to be changed back? [y/n] y
avrdude: and COULD NOT be changed
avrdude: safemode: Fuses not recovered, sorry
avrdude done. Thank you.
make: *** [program-minipov] Error 1
Thank you in advance and I hope someone can reply with an answer as I'm making this for my daughters birthday scavenger hunt. Hard to give a clue on the hunt via the miniPov with it not working... I know soo important, but we gotta have fun somewhere and while my kids are young I'm going to torture them. No present comes easy! The talking stuffed animal thanks to the Emic2 chip is hopefully going to be a hit. Wow do I love the Emic chip!