Hi,
I built a kit from your website and the kit works with the flashing lights program but I can not get avrdude to program the board.
1.minipov3 kit from adafruit
2.ubuntu 9.10 with a dell D600
3.serial port /dev/ttySo
$ sudo dmesg | grep serial
[ 0.895996] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
4.the kit flashes lights in a row when turned on.
5.I cant program the kit to customize the message.
6.I plug in the minipov kit, turn it on. Then run avrdude and I always get initialization failed.
Attached front,back, and screenshot.
help programming minipov3
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
-
- Posts: 2
- Joined: Fri Nov 20, 2009 11:18 am
help programming minipov3
- Attachments
-
- IMG_0992.JPG (551.26 KiB) Viewed 2077 times
-
- IMG_0991.JPG (530.2 KiB) Viewed 2077 times
-
- screenshot.png (36.73 KiB) Viewed 2077 times
-
- Posts: 1645
- Joined: Sat Nov 10, 2007 12:59 am
Re: help programming minipov3
in focus pictures would be more helpful.
is there any solder at all on the serial connector on the top side of the board?
is there any solder at all on the serial connector on the top side of the board?
-
- Posts: 2
- Joined: Fri Nov 20, 2009 11:18 am
Re: help programming minipov3
yes all the pins are soldered. sorry about the pics. I'll try and get some pics using another camera.
Please be positive and constructive with your questions and comments.