windows xp ver 5.1
load winavr and the responses are exactly as shown in the tutorial
get a cmd line and type avrdude and receive the 'not an interal or external command'
what am i missing? as this is a company computor, could they have put a limitation?
someone is going to think this is so easy...........
thanks, i'll try most anything, joe
avrdude not recognized as a command
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
-
- Posts: 12151
- Joined: Thu Apr 06, 2006 4:21 pm
Re: avrdude not recognized as a command
what tutorial? what kit?
- bottom-dragger
- Posts: 5
- Joined: Tue Dec 08, 2009 4:33 pm
Re: avrdude not recognized as a command
minipov
starting point
http://ladyada.net/make/minipov3/software.html
from windows skipped over to avr setup
http://ladyada.net/learn/avr/setup-win.html
everything matched the matched the installation
and then doing the test to see if had installed
and avrdude was not recognized
done a re-boot
done a re-load
had another beer
and that's where i'm at. joe
starting point
http://ladyada.net/make/minipov3/software.html
from windows skipped over to avr setup
http://ladyada.net/learn/avr/setup-win.html
everything matched the matched the installation
and then doing the test to see if had installed
and avrdude was not recognized
done a re-boot
done a re-load
had another beer
and that's where i'm at. joe
-
- Posts: 12151
- Joined: Thu Apr 06, 2006 4:21 pm
Re: avrdude not recognized as a command
you need to install winavr. use your home computer.
- bottom-dragger
- Posts: 5
- Joined: Tue Dec 08, 2009 4:33 pm
Re: avrdude not recognized as a command
it was the computer. everything went as explained.
might have to work at work tomorrow.
joe
might have to work at work tomorrow.
joe
Please be positive and constructive with your questions and comments.