Minipov not working with Linux
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
-
- Posts: 12
- Joined: Wed Feb 01, 2012 10:48 am
Re: Minipov not working with Linux
Yes, I've done all the manipulations as explain on your website.
-
- Posts: 12151
- Joined: Thu Apr 06, 2006 4:21 pm
Re: Minipov not working with Linux
hmm, not sure what the issue could be. do you have access to a computer with a hardware COM port?
-
- Posts: 12
- Joined: Wed Feb 01, 2012 10:48 am
Re: Minipov not working with Linux
No
I'm going to use an external programmer...
I'm going to use an external programmer...
-
- Posts: 12151
- Joined: Thu Apr 06, 2006 4:21 pm
Re: Minipov not working with Linux
OK! if you cant get it working, email support@adafruit and we'll refund the not-working stuff, sorry to hear you are having troubles
-
- Posts: 12
- Joined: Wed Feb 01, 2012 10:48 am
Re: Minipov not working with Linux
Great!
I will try this on Thursday...
I will try this on Thursday...
-
- Posts: 1645
- Joined: Sat Nov 10, 2007 12:59 am
Re: Minipov not working with Linux
you do have the board powered during programming, right?
no cold joints on the db-9 connector?
i've built a bunch of these as minipovs, minipovs with uv leds, brain machines, rgb brain machines, 4x4x4 led cubes. all programmed with linux. either opensuse or whatever it is that's on my eeepc.
with the led cubes i had to disconnect the leds from the programming lines to program the chip, but never had a problem with single leds on those lines.
no cold joints on the db-9 connector?
i've built a bunch of these as minipovs, minipovs with uv leds, brain machines, rgb brain machines, 4x4x4 led cubes. all programmed with linux. either opensuse or whatever it is that's on my eeepc.
with the led cubes i had to disconnect the leds from the programming lines to program the chip, but never had a problem with single leds on those lines.
Please be positive and constructive with your questions and comments.