Adding more leds

MiniPOV4 and previous versions

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
theugleymonkey
 
Posts: 11
Joined: Thu Sep 20, 2007 9:35 pm

Adding more leds

Post by theugleymonkey »

Is there a way to add more leds or is there a diffrent controller that i can use other then the ATTINY2313V-10PU. thanks

adafruit
 
Posts: 12151
Joined: Thu Apr 06, 2006 4:21 pm

Post by adafruit »

there are def a bunch of unused pins. check out the schematic to see which pins are not connected. then you can add LEDs and change the firmware to support more.

theugleymonkey
 
Posts: 11
Joined: Thu Sep 20, 2007 9:35 pm

Post by theugleymonkey »

your right there are alot of unused pins i am going to tinker with it tonight thanks.

danibilabibah
 
Posts: 5
Joined: Mon Oct 19, 2009 10:18 pm

Re:

Post by danibilabibah »

adafruit wrote:there are def a bunch of unused pins. check out the schematic to see which pins are not connected. then you can add LEDs and change the firmware to support more.
do you have schematic and firmware for this?
thank's

mtbf0
 
Posts: 1645
Joined: Sat Nov 10, 2007 12:59 am

Re: Adding more leds

Post by mtbf0 »

danibilabibah wrote:do you have schematic and firmware for this?
depends on what you want to do.

64 leds. no pov.

the movie. Image the diagram. Image

the code.

i've been running a slightly modified, (brighter), version of this 24/7 for months now off of the usb port of a machine on in the robotatatatatorium.

Locked
Please be positive and constructive with your questions and comments.

Return to “MiniPOV”