Programming minipov3 with USBASP

MiniPOV4 and previous versions

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
valek
 
Posts: 2
Joined: Sat Oct 27, 2012 12:08 pm

Programming minipov3 with USBASP

Post by valek »

Here is how to program an minipov3 with USBASP

If you are on Windows you'll need USBASP drivers : http://www.fischl.de/usbasp/
I made a version of the firmware with a Makefile for USBasp
You don't have to modify the file as there is no need to set a port.

Here is the entire firmware in Github: https://github.com/maditnerd/miniPOV3/tree/usbasp
Here is a direct link to the Makefile : https://raw.githubusercontent.com/madit ... p/Makefile

This version also correct the warning message: (viewtopic.php?f=11&t=56802)

Wiring
Majsterkowo made great image on how to wire an attiny2313 to an USBASP
http://majsterkowo.pl/programowanie-mik ... ra-usbasp/
(The site is in polish but the image speaks by themself)

Locked
Please be positive and constructive with your questions and comments.

Return to “MiniPOV”