me tooxlarge wrote:I'm counting the days
New 303-style Aluminum Enclosures
Moderators: altitude, adafruit_support_bill, adafruit, phono, hamburgers
Please be positive and constructive with your questions and comments.
- substyler
- Posts: 428
- Joined: Tue Dec 02, 2008 6:29 pm
Re: New 303-style Aluminum Enclosures
- substyler
- Posts: 428
- Joined: Tue Dec 02, 2008 6:29 pm
Re: New 303-style Aluminum Enclosures
I know, I know... everything's in stock except the frontpanels
made a call today and the guys wich are working on the fronplates told me next week.
so...
made a call today and the guys wich are working on the fronplates told me next week.
so...
-
- Posts: 151
- Joined: Wed Jul 11, 2007 2:02 pm
Re: New 303-style Aluminum Enclosures
Awesome! =)
-
- Posts: 11
- Joined: Fri Oct 22, 2010 4:23 am
Re: New 303-style Aluminum Enclosures
Can't wait! Shitting myself about resoldering the two 2200 caps to get it to fit in, might need an electrician for that! I'm no whizz with a soldering iron...
Keith
Keith
- substyler
- Posts: 428
- Joined: Tue Dec 02, 2008 6:29 pm
Re: New 303-style Aluminum Enclosures • finally
yo x0xers
so finally they are here! starting today we deliver our aluminum enclosure kits, so orders are welcome
three words: they look awesome!!
the kits comes with a set of new 2200uF electrolytic condos, hooked up with cables and heat shrink sleeve, because you have to modify your power supply board.
the ON/OFF switch will be pre-installed in the backplane. all screws are included and a metal angle to stabilize the front panel. of course a little manual tells you how to do! but trust me: it's easy like doing a step! you have to be really lazy if you didn't do that in less than 15 minutes
this kit comes without knobs, so you can choose your favorite knobs.
we also have a really nice selection of toggles and aluminum knobs, particularly selected for this kit. (pics coming later)
the enclosure kit costs 85 euro each. not really cheap... but we think it's worth. the knob kit costs 19,90 euro but if you order the enclosure kit with knobs you'll get it for just 99 euro!
shipping costs: germany 6,90 euro, EU 16 euro, rest of the world 22 euro.
this is what we deliver:
Top-panel with welded screw mounts
bottom plate
aluminum side rails
frontpanel
backplane with built in ON/OFF switch
set of 2200 uF electrolytic condos
screws
manual
cheers,
SubStyler
PS. on that picture you see two top-panels wrapped with foil, this is just for showing you the design of the top-panels. you'll receive a top-panel and matching bottom plate of course
so finally they are here! starting today we deliver our aluminum enclosure kits, so orders are welcome
three words: they look awesome!!
the kits comes with a set of new 2200uF electrolytic condos, hooked up with cables and heat shrink sleeve, because you have to modify your power supply board.
the ON/OFF switch will be pre-installed in the backplane. all screws are included and a metal angle to stabilize the front panel. of course a little manual tells you how to do! but trust me: it's easy like doing a step! you have to be really lazy if you didn't do that in less than 15 minutes
this kit comes without knobs, so you can choose your favorite knobs.
we also have a really nice selection of toggles and aluminum knobs, particularly selected for this kit. (pics coming later)
the enclosure kit costs 85 euro each. not really cheap... but we think it's worth. the knob kit costs 19,90 euro but if you order the enclosure kit with knobs you'll get it for just 99 euro!
shipping costs: germany 6,90 euro, EU 16 euro, rest of the world 22 euro.
this is what we deliver:
Top-panel with welded screw mounts
bottom plate
aluminum side rails
frontpanel
backplane with built in ON/OFF switch
set of 2200 uF electrolytic condos
screws
manual
cheers,
SubStyler
PS. on that picture you see two top-panels wrapped with foil, this is just for showing you the design of the top-panels. you'll receive a top-panel and matching bottom plate of course
- Attachments
-
- alu-kit.jpg (399.62 KiB) Viewed 3640 times
Last edited by substyler on Mon Nov 15, 2010 7:47 pm, edited 1 time in total.
- substyler
- Posts: 428
- Joined: Tue Dec 02, 2008 6:29 pm
Re: New 303-style Aluminum Enclosures
just forgot to mention, if you want your enclosure you can just drop me a mail to the known email address or send me PM here
cheers,
SubStyler
cheers,
SubStyler
- phono
- Posts: 1502
- Joined: Wed May 02, 2007 4:01 pm
Re: New 303-style Aluminum Enclosures
Taking it to the next level, good job
-
- Posts: 11
- Joined: Fri Oct 22, 2010 4:23 am
Re: New 303-style Aluminum Enclosures
Hi Christian,
I'd like to order the aluminium enclosure & silver knobs for 99€ plus UK delivery 16€.
What's the best way to go about it?
I've no soldering experience, is the transfer into the new enclosure difficult?
Kind regards
Keith
I'd like to order the aluminium enclosure & silver knobs for 99€ plus UK delivery 16€.
What's the best way to go about it?
I've no soldering experience, is the transfer into the new enclosure difficult?
Kind regards
Keith
- substyler
- Posts: 428
- Joined: Tue Dec 02, 2008 6:29 pm
Re: New 303-style Aluminum Enclosures
okay... and this is what it looks like if you're finished
those are by the way the alu-knobs which we've selected.
cheers
SubStyler
this night and tomorrow I'll be very busy with arranging the enclosure kits, so please don't go crazy if I do not write back immediately
those are by the way the alu-knobs which we've selected.
cheers
SubStyler
this night and tomorrow I'll be very busy with arranging the enclosure kits, so please don't go crazy if I do not write back immediately
- paradigm x
- Posts: 237
- Joined: Sun Feb 07, 2010 3:49 pm
Re: New 303-style Aluminum Enclosures
Beautiful.
If i can ever justify a third x0x ill get one of those.
Cheers.
If i can ever justify a third x0x ill get one of those.
Cheers.
-
- Posts: 11
- Joined: Fri Oct 22, 2010 4:23 am
Re: New 303-style Aluminum Enclosures
Damn, that looks BANNED hot!
-
- Posts: 221
- Joined: Mon Nov 23, 2009 9:34 pm
Re: New 303-style Aluminum Enclosures
This is really good work, the price is good too.
I think these are the only ones worth building.
People we have a new standard
count me in.
I think these are the only ones worth building.
People we have a new standard
count me in.
-
- Posts: 43
- Joined: Thu Jul 22, 2010 8:53 am
Re: New 303-style Aluminum Enclosures
That looks the ‘Dog’s Nads’ (that’s a compliment for those not familiar with the vernacular! I like that you are including two replacement caps pre-wired, a nice touch. But I am torn, between pure gear lust and the reality that my x0x doesn’t sound right (and therefore doesn’t warrant any more being spent on it).
Otherwise I would have been all over this like a rash.
Otherwise I would have been all over this like a rash.
-
- Posts: 18
- Joined: Sat Mar 13, 2010 12:16 pm
Re: New 303-style Aluminum Enclosures
Wow, the pictures are beautiful!
Eric
Eric
Last edited by funx on Tue Nov 23, 2010 9:52 pm, edited 1 time in total.
Please be positive and constructive with your questions and comments.