I got the whole thing finished a couple of days ago. No Mods installed yet.
When running a pattern i have found there is a 'lag' in Tempo when adjusting the Tempo pot.
It seems to almost take a little time for the circuit to catch up with the physical movement of the pot.
As the Tempo increases the response seems to get a bit more immediate.
Winding the Tempo downwards takes multiple turns and is slow to respond.
Is this just a quirk of the Rotary Encoder used for the Tempo ?
I'd be keen to hear from other builders that have built this Willzyx x0x kit.
James (Willzyx) is an awesome guy and has been very helpful , the unit sounds awesome.
I just want to figure out the quirks...
Tempo 'lag' when adjusting Tempo pot - Willzyx kit x0xb0x
Moderators: altitude, adafruit_support_bill, adafruit, phono, hamburgers
Please be positive and constructive with your questions and comments.
- cleaninglady
- Posts: 38
- Joined: Thu Jun 14, 2012 6:33 am
-
- Posts: 151
- Joined: Wed Jul 11, 2007 2:02 pm
Re: Tempo 'lag' when adjusting Tempo pot - Willzyx kit x0xb0x
That's how the firmwares works i'm afraid.
(i've heard rumors about someone fixing it in some firmware somewhere but i don't know, please enlighten us)
(i've heard rumors about someone fixing it in some firmware somewhere but i don't know, please enlighten us)
- cleaninglady
- Posts: 38
- Joined: Thu Jun 14, 2012 6:33 am
Re: Tempo 'lag' when adjusting Tempo pot - Willzyx kit x0xb0x
Thanks xlarge !
- antto
- Posts: 1636
- Joined: Thu Apr 15, 2010 3:21 pm
Re: Tempo 'lag' when adjusting Tempo pot - Willzyx kit x0xb0x
i think that was guest that fixed it in the x0xb0x2.hex (aka the firmware for the cpu upgrade)xlarge wrote:That's how the firmwares works i'm afraid.
(i've heard rumors about someone fixing it in some firmware somewhere but i don't know, please enlighten us)
- cleaninglady
- Posts: 38
- Joined: Thu Jun 14, 2012 6:33 am
Re: Tempo 'lag' when adjusting Tempo pot - Willzyx kit x0xb0x
how do i load a firmware update onto the x0x.
i have a mac not PC , do i need other gear to do it ?
i have a mac not PC , do i need other gear to do it ?
- antto
- Posts: 1636
- Joined: Thu Apr 15, 2010 3:21 pm
Re: Tempo 'lag' when adjusting Tempo pot - Willzyx kit x0xb0x
http://www.youtube.com/watch?v=9LuWMUQQ750cleaninglady wrote:how do i load a firmware update onto the x0x.
i have a mac not PC , do i need other gear to do it ?
in the video description there's the link to the BANNED thread
you need to also get the VCP driver to make the USB/Serial port work
once the driver and BANNED are installed - follow the first part of the video
ask if you have any questions
Please be positive and constructive with your questions and comments.