No Square Wave VCO output
Moderators: altitude, adafruit_support_bill, adafruit, phono, hamburgers
Please be positive and constructive with your questions and comments.
-
- Posts: 4
- Joined: Mon Oct 08, 2012 11:10 am
No Square Wave VCO output
Just completed building my first X0Xbox. The saw output works just fine but the square wave is very faint. I went back through and checked everything on the board and it all looks fine. Any ideas?
-
- Posts: 4
- Joined: Mon Oct 08, 2012 11:10 am
Re: No Square Wave VCO output
Can anyone tell me the voltages out of Q8? Actually all of the voltages for the VCO would be helpful. Thanks.
- mmm
- Posts: 517
- Joined: Tue Apr 24, 2012 1:51 am
-
- Posts: 4
- Joined: Mon Oct 08, 2012 11:10 am
Re: No Square Wave VCO output
Ok. So i checked my VCO output voltages. 8.16 for saw and 6.86 for square. I can put a headphone up to the output of the waveform switch and clearly hear the square wave. But it is very, very faint out of the headphone or line out. The saw has plenty of volume though.
-
- Posts: 4
- Joined: Mon Oct 08, 2012 11:10 am
Re: No Square Wave VCO output
Does anyone have anything like this for the VCO section? Thanks.
Please be positive and constructive with your questions and comments.