by dozibal on Mon Dec 10, 2012 6:47 am

In the TB303 manual some Germanium diodes are mentioned. I wonder why they were replaced by 1n4148 diodes in the Xoxbox though they are different electrical behaviour?
Posts: 2
Joined: Sun Oct 04, 2009 4:13 am

by antto on Mon Dec 10, 2012 4:46 pm

no idea, but you got me interested..
which places they are in?
We are here too: >>> #x0xb0x
..:: c0nb0x v1.00 ::.. (new control app - win/osx)
VCO Tuning: (do it the EASY way)
User avatar
Posts: 1237
Joined: Thu Apr 15, 2010 2:21 pm

by MMM on Mon Dec 10, 2012 6:04 pm

The service manual mentions a 1S-188FM Ge Diode however I've been so far unable to find it in the schematics.

The "standard" diode used was AFAIK the 1S2473.
Posts: 420
Joined: Tue Apr 24, 2012 12:51 am

by dozibal on Tue Dec 11, 2012 1:33 am

The diodes are not visible in the schematics, that is true. Anybody with a TB303 here? If they are in the PSU section we don't need them otherwise we do.
Posts: 2
Joined: Sun Oct 04, 2009 4:13 am

by veracohr on Thu Dec 20, 2012 9:44 pm

Germanium semiconductors aren't very common anymore, and in the case of the 1N4148 diodes in the x0x power supply, it doesn't matter. The main difference between germanium and silicon diodes are the forward voltage drop, being about 200-300mV for germanium and 600-700mV for silicon low-current diodes.

The diodes in the x0x PSU are providing a stable voltage that is adjustable via TM6. There are two in series, then a potentiometer (TM6) in series, then another two diodes in series. Basically, TM6 is sitting at a relatively unchanging voltage determined by the voltage drops of the diodes, and the position of the pot wiper is connected to the adjust pin of an adjustable voltage reference (IC22). As far as those diodes are concerned, all that is important is to have a stable voltage, which can be accomplished with any choice of diodes. This subcircuit provides the 5.333V supply.
Posts: 14
Joined: Sun Nov 27, 2011 10:25 pm