Incorrect voltages

by EdPhilips on Mon Mar 04, 2013 12:38 pm

So, I'm building the VCO, I do have a question about the voltages.

1. On IC11 Pin 1 I'm getting 4,61V , all other voltages on the remaining pins are right.
Is this a problem and if yes, any ideas to resolve this?

2. The DC Bias on the squarewave is not around 7V, it's more like 9,5V
Again, any ideas?

Thanks a mill'!
Posts: 5
Joined: Mon Feb 25, 2013 11:57 am