Incorrect voltages

Discuss x0x construction and related issues

Moderators: altitude, adafruit_support_bill, adafruit, phono, hamburgers

Please be positive and constructive with your questions and comments.
Locked
EdPhilips
 
Posts: 5
Joined: Mon Feb 25, 2013 12:57 pm

Incorrect voltages

Post by EdPhilips »

So, I'm building the VCO, I do have a question about the voltages.

1. On IC11 Pin 1 I'm getting 4,61V , all other voltages on the remaining pins are right.
Is this a problem and if yes, any ideas to resolve this?

2. The DC Bias on the squarewave is not around 7V, it's more like 9,5V
Again, any ideas?

Thanks a mill'!

Locked
Please be positive and constructive with your questions and comments.

Return to “Making x0x”