So, I'm building the VCO, I do have a question about the voltages.
1. On IC11 Pin 1 I'm getting 4,61V , all other voltages on the remaining pins are right.
Is this a problem and if yes, any ideas to resolve this?
2. The DC Bias on the squarewave is not around 7V, it's more like 9,5V
Again, any ideas?
Thanks a mill'!
Incorrect voltages
Moderators: altitude, adafruit_support_bill, adafruit, phono, hamburgers
Please be positive and constructive with your questions and comments.
Please be positive and constructive with your questions and comments.