First time x0xing. Constant signal from r146 during envelope

Discuss x0x construction and related issues

Moderators: altitude, adafruit_support_bill, adafruit, phono, hamburgers

Please be positive and constructive with your questions and comments.
Locked
User avatar
cuznmatt
 
Posts: 5
Joined: Wed Aug 27, 2014 8:12 am

First time x0xing. Constant signal from r146 during envelope

Post by cuznmatt »

Hi there,

complete novice here.

everything has been going smashingly, perfect results with each test thus far.

have finished the envelope section. when conducting the test at d35 I get 11.75 volts, when I disconnect the clip it remains at this instead of dropping to zero. No result whatsoever from testing d36.

Have triple checked all components. actually make that quadruple checked. everything is in the right way with the right values. have i possibly blown something?

Cheers for any help.

User avatar
Terrakroma
 
Posts: 9
Joined: Tue Aug 19, 2014 7:38 pm

Re: First time x0xing. Constant signal from r146 during enve

Post by Terrakroma »

Same thing happened to me. My envelops are fine:)

User avatar
cuznmatt
 
Posts: 5
Joined: Wed Aug 27, 2014 8:12 am

Re: First time x0xing. Constant signal from r146 during enve

Post by cuznmatt »

So just proceed?

User avatar
altitude
 
Posts: 995
Joined: Wed May 11, 2005 5:17 pm

Re: First time x0xing. Constant signal from r146 during enve

Post by altitude »

I dont think that part will work correctly without the digital section to trigger it so proceed

User avatar
cuznmatt
 
Posts: 5
Joined: Wed Aug 27, 2014 8:12 am

Re: First time x0xing. Constant signal from r146 during enve

Post by cuznmatt »

Cool, I moved along, up to the sequencer. Fun times ahead. I/O board done, mixer done.

Thanks for the advice.

Locked
Please be positive and constructive with your questions and comments.

Return to “Making x0x”