New CPU Project
Moderators: altitude, adafruit_support_bill, adafruit, phono, hamburgers
Please be positive and constructive with your questions and comments.
- dnigrin
- Posts: 123
- Joined: Fri May 15, 2009 5:24 pm
Re: New CPU Project
I'm committed to the *full* x0xi0 as well - it's the only x0x configuration I have at the moment. So +1 for me on a new board that will fit it....
-
- Posts: 203
- Joined: Wed Apr 22, 2009 2:06 pm
Re: New CPU Project
textile wrote:The x0xi0 should work , its just hardware mods , yeah?
Plug in play yes.
It should be available late July. Cost around $50 built . Blank boards will be available as well.
Hi there.. nice progress.. but from the dimensions.. does this exceed the dimensions of the xox board? it looks a bit like it.. because if it does it dont fits in certain custom exclosures..
-
- Posts: 221
- Joined: Mon Nov 23, 2009 9:34 pm
Re: New CPU Project
- The board does not exceed the mainboard. So it will fit any box that already houses the stock mainboard.
I think I might be able to do a board that fits both.
I think I might be able to do a board that fits both.
-
- Posts: 146
- Joined: Thu Oct 30, 2008 9:00 am
Re: New CPU Project
Yes i've got custom pcb for x0xi0 and i'd like to have cpu upgrade !Ok. Who else needs it to fit with the x0xi0?
-
- Posts: 221
- Joined: Mon Nov 23, 2009 9:34 pm
Re: New CPU Project
I need the measurements for the area around the socket on the x0xi0. BC hasn't returned my email.
I could guess from looking but then there is a chance that it wont fit...
Measure from the bottom ( notch top ) of the uC up to C58 over to C52.
Thanks!
I could guess from looking but then there is a chance that it wont fit...
Measure from the bottom ( notch top ) of the uC up to C58 over to C52.
Thanks!
- rv0
- Posts: 395
- Joined: Tue Jul 14, 2009 4:50 pm
Re: New CPU Project
i could measure it for you but i dont have a clue what exactly i have to measure.. C58 & C52 are not anyway near the IC socket.textile wrote:I need the measurements for the area around the socket on the x0xi0. BC hasn't returned my email.
I could guess from looking but then there is a chance that it wont fit...
Measure from the bottom ( notch top ) of the uC up to C58 over to C52.
Thanks!
forgive my stupidness maybe.
the bottom pins of the ic are about 22.3 mm away from the bottom of the pcb.
the side pins of the ic are about 2.7 mm away from the side of the pcb.
approximately, i can't tell exactly because i already have a socket soldered in
-
- Posts: 221
- Joined: Mon Nov 23, 2009 9:34 pm
Re: New CPU Project
Now looking at it again I see that the uC is the other way around to the stock. So I have to make a dedicated board for the x0xi0.
I can go a fair way to the side so I 'll just do it that way.
Thanks for the measurements anyway!
I can go a fair way to the side so I 'll just do it that way.
Thanks for the measurements anyway!
- rv0
- Posts: 395
- Joined: Tue Jul 14, 2009 4:50 pm
Re: New CPU Project
why wouldnt the "dedicated board" for x0xI0 not be compatible with the normal pcb?
-
- Posts: 221
- Joined: Mon Nov 23, 2009 9:34 pm
Re: New CPU Project
The board for the stock x0x is FINISHED!
I just need to finish the x0xi0 now .
The stock wont work on the x0xi0 *custom mainboard* as the uC is position the other way so the board would not fit in the enclosure and vice versa. But its nearly finished anyway.
I just need to finish the x0xi0 now .
The stock wont work on the x0xi0 *custom mainboard* as the uC is position the other way so the board would not fit in the enclosure and vice versa. But its nearly finished anyway.
-
- Posts: 587
- Joined: Thu May 25, 2006 1:30 am
Re: New CPU Project
textile, I think you sent me an email regarding this and I didn't reply yet? refresh me
- antto
- Posts: 1636
- Joined: Thu Apr 15, 2010 3:21 pm
Re: New CPU Project
textile: stock x0xb0x mod is finished?
so, i want one ;] have no idea what it'll cost me but i want it right away ;]
erm, i need it
so, i want one ;] have no idea what it'll cost me but i want it right away ;]
erm, i need it
- phono
- Posts: 1502
- Joined: Wed May 02, 2007 4:01 pm
Re: New CPU Project
put me down for a stock board too please
-
- Posts: 13
- Joined: Sat Feb 13, 2010 5:02 am
Re: New CPU Project
+1phono wrote:put me down for a stock board too please
- rv0
- Posts: 395
- Joined: Tue Jul 14, 2009 4:50 pm
Re: New CPU Project
ok i'll wait for the x0xI0 cpu
but put me up for 2 normal ones for my friends' x0x.
but put me up for 2 normal ones for my friends' x0x.
-
- Posts: 221
- Joined: Mon Nov 23, 2009 9:34 pm
Re: New CPU Project
It on its way
Yo BC! I was just after measurements but its ok as there is plenty of room to the side of the x0xi0 custom board.
Yo BC! I was just after measurements but its ok as there is plenty of room to the side of the x0xi0 custom board.
Please be positive and constructive with your questions and comments.