oh and
what about this
Using Ableton as master, when i have to stop the sequence, select a new cue point and start again, the xox continues from the step
it left off on, it doesn't start from the 1st step of the patterm
My other drum machine (707, 909) start from the 1st step when I stop ableton, select a new cue point and start again, just the xox starts, or rather continues, and whatever bar it left off on
SokkOS 2.0, beta
Moderators: altitude, adafruit_support_bill, adafruit, phono, hamburgers
Please be positive and constructive with your questions and comments.
- human fly
- Posts: 55
- Joined: Sat Feb 19, 2011 8:21 am
Re: SokkOS 2.0, beta
sokkhan: would u consider doing an alternative version taking into account
3phase's requests? like, cut down on the non-303 features, and focus on
replicating functions of original exactly, within the existing cpu?(but allowing
editing without stopping sequencer...)
or does this eat enough time already?
3phase's requests? like, cut down on the non-303 features, and focus on
replicating functions of original exactly, within the existing cpu?(but allowing
editing without stopping sequencer...)
or does this eat enough time already?
-
- Posts: 203
- Joined: Wed Apr 22, 2009 2:06 pm
Re: SokkOS 2.0, beta
i would think that antos nonxox system is rather the place tp try to get real 303ish..human fly wrote:sokkhan: would u consider doing an alternative version taking into account
3phase's requests? like, cut down on the non-303 features, and focus on
replicating functions of original exactly, within the existing cpu?(but allowing
editing without stopping sequencer...)
or does this eat enough time already?
but as antos nonxox would benefit from some sokkos functionality the sokos could benefit from some original 303 features..
like the triplets now.-. they are defently beneficial..
things that come in my mind imideatly that i i miss from a real 303 is the ability to edit multi bar patterns... because i mostly do 2 bar 303 patterns...
and the realtime gate input.. to quickly get a rhytmical idea into the sequencer..
-
- Posts: 59
- Joined: Tue Nov 09, 2010 7:43 pm
- human fly
- Posts: 55
- Joined: Sat Feb 19, 2011 8:21 am
Re: SokkOS 2.0, beta
well i don't know if this relevant, - may be covered already - but if 'start' has a reset
trigger to ensure it starts from top of sequence each time you hit 'play', then a NOT
gate with a reset trigger will ensure it returns to top of bar on 'stop'.
trigger to ensure it starts from top of sequence each time you hit 'play', then a NOT
gate with a reset trigger will ensure it returns to top of bar on 'stop'.
- altitude
- Posts: 995
- Joined: Wed May 11, 2005 5:17 pm
Re: SokkOS 2.0, beta
This is not a problem, just how the sequencer works. if you want it to restart, send a midi start message, if not dont. That is the most flexible method since not everyone would want it to always restart the loop (and also how a midi device should react). All the code is open source if you want to make changes specific to your setup..
- human fly
- Posts: 55
- Joined: Sat Feb 19, 2011 8:21 am
Re: SokkOS 2.0, beta
yes. of course. i forget.
-
- Posts: 240
- Joined: Sat Sep 01, 2007 12:56 pm
Re: SokkOS 2.0, beta
I freed up quite a lot of code space some time ago.
So, I have space to implement 2 new features in edit mode. If the sequencer is stopped, you basically get pitch+time as separate inputs, if you start the sequencer or have it running you get real-time input of what was put in with the sequencer stopped or with what was already in the pattern.
This is the most 303-like editing modes I could think of that is easy to implement.
Unfortunately, I am out of button-press combinations.
So, is this a good idea?
I need to rearrange stuff to get it to work probably, or in the worst case actually remove something. Any suggestions on what button press/presses feels most natural for selecting the AlmostButNotReallyA303-mode?
So, I have space to implement 2 new features in edit mode. If the sequencer is stopped, you basically get pitch+time as separate inputs, if you start the sequencer or have it running you get real-time input of what was put in with the sequencer stopped or with what was already in the pattern.
This is the most 303-like editing modes I could think of that is easy to implement.
Unfortunately, I am out of button-press combinations.
So, is this a good idea?
I need to rearrange stuff to get it to work probably, or in the worst case actually remove something. Any suggestions on what button press/presses feels most natural for selecting the AlmostButNotReallyA303-mode?
- altitude
- Posts: 995
- Joined: Wed May 11, 2005 5:17 pm
Re: SokkOS 2.0, beta
Oh hell yes.
What about using the tempo button as a "shift"?
What about using the tempo button as a "shift"?
Last edited by altitude on Thu Apr 28, 2011 6:53 am, edited 1 time in total.
- paradigm x
- Posts: 237
- Joined: Sun Feb 07, 2010 3:49 pm
Re: SokkOS 2.0, beta
I wouldnt mind so long as everything in the current sokkos (1.91) works as it does currently. Its absolutely perfect IMO (non 303 owner tho..)
Personally the sysex is of no interest to me... could be removed. To be honest it doesnt do anything the safeb0x application cant do... Sorry
Personally the sysex is of no interest to me... could be removed. To be honest it doesnt do anything the safeb0x application cant do... Sorry
-
- Posts: 240
- Joined: Sat Sep 01, 2007 12:56 pm
Re: SokkOS 2.0, beta
The current stuff is mostly left intact at the moment. I also did some bugfixes, notably the loop-mode when having non-16step patterns, I also changed the MIDI transpose into acting instantly.Paradigm X wrote:I wouldnt mind so long as everything in the current sokkos (1.91) works as it does currently. Its absolutely perfect IMO (non 303 owner tho..)
Personally the sysex is of no interest to me... could be removed. To be honest it doesnt do anything the safeb0x application cant do... Sorry
Sysex does one thing you can not do with safeb0x, you can save and load patterns on a computer without setting up all the USB-driver stuff for the x0xb0x.
- paradigm x
- Posts: 237
- Joined: Sun Feb 07, 2010 3:49 pm
Re: SokkOS 2.0, beta
Cool; never thought of that. Ive been one of the lucky ones who the USB just worked first time. Youre right, a lot of people do have issues with the USB side.
Not a criticism; your firmware really does take the x0x to a next level and i really appreciate all the time youve put into it
Not a criticism; your firmware really does take the x0x to a next level and i really appreciate all the time youve put into it
-
- Posts: 37
- Joined: Wed Jan 21, 2009 3:04 am
Re: SokkOS 2.0, beta
I got an issue with the transpose-function:
When using two x0xb0xes and slaving the other one via MIDI sync, the first one keeps sending transpose from the pattern of the first one. Is there a way of turning off with output of midi notes while using the x0xb0x as a midi master?
(off course you could sidestep this problem by using DIN-sync for synchronisation, I know that)
When using two x0xb0xes and slaving the other one via MIDI sync, the first one keeps sending transpose from the pattern of the first one. Is there a way of turning off with output of midi notes while using the x0xb0x as a midi master?
(off course you could sidestep this problem by using DIN-sync for synchronisation, I know that)
-
- Posts: 240
- Joined: Sat Sep 01, 2007 12:56 pm
Re: SokkOS 2.0, beta
You can not turn off the outputting of MIDI notes.kroffe wrote:I got an issue with the transpose-function:
When using two x0xb0xes and slaving the other one via MIDI sync, the first one keeps sending transpose from the pattern of the first one. Is there a way of turning off with output of midi notes while using the x0xb0x as a midi master?
(off course you could sidestep this problem by using DIN-sync for synchronisation, I know that)
However:
<captain obvious>
Have you tried setting the slaved x0xb0x to a different MIDI channel than the master is sending on?
</captain obvious>
-
- Posts: 37
- Joined: Wed Jan 21, 2009 3:04 am
Re: SokkOS 2.0, beta
doh!Sokkan wrote: <captain obvious>
Have you tried setting the slaved x0xb0x to a different MIDI channel than the master is sending on?
</captain obvious>
Please be positive and constructive with your questions and comments.