Midi in Problem

by **richbev** » Mon Mar 15, 2010 7:08 am

Hi,
I just built my second midisense board (first one is in an exhibition at the moment). I seem to be having a real problem with this one. It all powers up fine and is sending midi out but I can't connect to the midisense software. I'm sending midi out of my computer via logic and the flashing led is not changing to red, i'm wondering if that means that the midi in is not working. I've double checked my soldering and all seems fine... any ideas anyone?

I doid notice that my midisense came with 1k resistors in place of the 1.5k, think that might be it?

Thanks

by **richbev** » Mon Mar 15, 2010 8:31 am

So i've been doing some more reading in the forums and found this thread: viewtopic.php?f=14&t=5116

My oscillator says '8.00M', should it be 16mhz?

by **richbev** » Mon Mar 15, 2010 8:40 am

I forgot to mention that the red light flashes once when I first turn the midisense on.

Thanks

by **adafruit** » Mon Mar 15, 2010 5:42 pm

which midisense do you have?

by **richbev** » Wed Mar 17, 2010 2:01 am

Hi,

Thank you for the reply!

I have V1.0a.

by **richbev** » Wed Mar 17, 2010 2:23 pm

Well, thats what the board says. The packet says v1.2.

by **adafruit** » Thu Mar 18, 2010 5:14 pm

ok, what -kind- of midisense?

by **richbev** » Fri Mar 19, 2010 2:06 am

The packet says 'midisense res kit v1.2'

thanks

by **adafruit** » Fri Mar 19, 2010 2:38 pm

the res should be 8mhz. you could try posting a photo and we'll look for issues

Midi in Problem

Midi in Problem

Re: Midi in Problem

Re: Midi in Problem

Re: Midi in Problem

Re: Midi in Problem

Re: Midi in Problem

Re: Midi in Problem

Re: Midi in Problem

Re: Midi in Problem

Who is online