I want to make my Minty boost as small as possible. I was thinking about running 3AAAs instead of 2AAs. My question is how do I find out the mAh rating on batteries? I am also confused as to if the mAh rating on the Minty project page is for a single battery or a set.
I do understand that even with 3AAAs I will get less of a charge out of them but I am ok with that. I want it small so I can carry it in my pocket with all the other things I carry.
I would also be interested to know about running CR2 or CR123A batteries as I have other things that use them. They can be surprisingly cheap when ordered in a large quantity.
Thank you
Battery question
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- roamingnome47
- Posts: 8
- Joined: Tue Oct 30, 2012 2:07 pm
Re: Battery question
Well I got most of my answers about the CR2 and CR123A here (I was looking for battery holders and the size difference between the 2. Thought I would share this info
http://www.panasonic.com/industrial/inc ... CR123A.pdf
http://www.panasonic.com/industrial/inc ... CR123A.pdf
- adafruit_support_bill
- Posts: 88097
- Joined: Sat Feb 07, 2009 10:11 am
Re: Battery question
For a set of batteries in series, the mAh rating is the same as for the individual cells - only the voltage is higher. (parallel cells is not recommended)I am also confused as to if the mAh rating on the Minty project page is for a single battery or a set.
Let us know how they perform for you!Well I got most of my answers about the CR2 and CR123A here
Please be positive and constructive with your questions and comments.