I Have to buy some components on farnell but I don't find the
18R223C inductor.
I Find some 22Uh Inductor but not with the Same DC current or the same DC resistance...
Which specifications are important to Find a substitute.
22UH Value?
Power inductor?
2.5 A max?
0.03 Ohm?
Frequency and Q?
I find some Possible Replacements..
INDUCTANCE AXIALE 22UH
Inductance:22µH; Type d'inductance:Inductor; Courant c.c. max.:3A; Résistance:0.07Ohm; Tolérance +:20%; Tolérance -:20%; Type de boîtier:Axial; Fréquence, résonance:110MHz; Tension c.c.:500V; Tens
INDUCTANCE DE PUISSANCE 10X10 22UH
Inductance:22µH; Type d'inductance:Inductor; Courant c.c. max.:2.1A; Résistance:0.085Ohm; Tolérance +:10%; Tolérance -:10%; Type de boîtier:10 x 10; Fréquence, résonance:15MHz; Boîtie
NDUCTANCE DE PUISSANCE 10X10 22UH
Inductance:22µH; Type d'inductance:Inductor; Courant c.c. max.:2.25A; Résistance:0.052Ohm; Tolérance +:20%; Tolérance -:20%; Type de boîtier:10 x 10; Fréquence, résonance:13MHz; Boîtie
INDUCTANCE DE PUISSANCE 22UH
Inductance:22µH; Type d'inductance:Inductor; Courant c.c. max.:3.6A; Résistance:0.038Ohm; Tolérance +:20%; Tolérance -:20%; Type de boîtier:12 x 12; Boîtier (1=CMS):1; Catégorie climatique:5.5 A max?
any suggestions?
thanks
Cannot find 18R223C, Substitute?
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
-
- Posts: 4
- Joined: Mon Aug 06, 2007 7:39 am
Ok, I compare the inductors and I only find this one :
B82477G4223M — BANNED —Power inductor SMD 22UH
# NDUCTOR, POWER 22uH
# Inductance:22µH
# Inductor type:Inductor
# Current, DC max:3.6A
# Resistance:0.038R
# Tolerance, +:20%
# Tolerance, -:20%
# Frequency, inductance measurement:100kHz
It's a SMD inductor But I guess it's Possible To solder it on a Class copperboard.
B82477G4223M — BANNED —Power inductor SMD 22UH
# NDUCTOR, POWER 22uH
# Inductance:22µH
# Inductor type:Inductor
# Current, DC max:3.6A
# Resistance:0.038R
# Tolerance, +:20%
# Tolerance, -:20%
# Frequency, inductance measurement:100kHz
It's a SMD inductor But I guess it's Possible To solder it on a Class copperboard.
Please be positive and constructive with your questions and comments.