Hello Everyone,
I am getting voltage readings from USB pin1, but not pins 2 and 3. Any advice?
Bokononisms
P.S. Pictures were taken on a table, but the work didn't occur there!
No voltage readings on USB pins 2 and 3
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
-
- Posts: 1
- Joined: Sun Mar 23, 2014 1:35 pm
No voltage readings on USB pins 2 and 3
- Attachments
-
- tmp_P_20140323_140332-1-824206154.jpg (300.27 KiB) Viewed 828 times
-
- tmp_P_20140323_140427-12136537763.jpg (306.95 KiB) Viewed 828 times
-
- tmp_P_20140323_140239-1478808122.jpg (230.65 KiB) Viewed 828 times
- adafruit_support_bill
- Posts: 88096
- Joined: Sat Feb 07, 2009 10:11 am
Re: No voltage readings on USB pins 2 and 3
I see several solder joints with little or no solder. The solder should wet the pin and the pad and form a cross section like the diagram below. Read through this guide for tips on fixing these solder joints:
http://learn.adafruit.com/adafruit-guid ... n-problems
http://learn.adafruit.com/adafruit-guid ... n-problems
Please be positive and constructive with your questions and comments.