about rc1b can anyone upload the eagle files

The operation of transmitters designed to jam or block wireless communications is a violation of the Communications Act of 1934, as amended ("Act"). See 47 U.S.C. Sections 301, 302a, 333. The Act prohibits any person from willfully or maliciously interfering with the radio communications of any station licensed or authorized under the Act or operated by the U.S. government. 47 U.S.C. Section 333. The manufacture, importation, sale or offer for sale, including advertising, of devices designed to block or jam wireless transmissions is prohibited. 47 U.S.C. Section 302a(b). Parties in violation of these provisions may be subject to the penalties set out in 47 U.S.C. Sections 501-510. Fines for a first offense can range as high as $11,000 for each violation or imprisonment for up to one year, and the device used may also be seized and forfeited to the U.S. government.

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
sergei
 
Posts: 1
Joined: Fri Jun 10, 2011 3:45 am

about rc1b can anyone upload the eagle files

Post by sergei »

I need the rc1 b files but in eagle i can't use in gerber format.If anyone can please uplaod them or send them to me.
[email protected]
or if anyone has complete the changes at the eagle files of rc1a.
i try to download from http://forums.adafruit.com/viewtopic.php?f=16&t=10547 but they may have a problem i can't open them.Tanks.

TheFallen
 
Posts: 94
Joined: Mon Feb 08, 2010 1:28 pm

Re: about rc1b can anyone upload the eagle files

Post by TheFallen »

I used 7zip and I can open them just fine, although there's a lot of stuff in the tarball. You can get it here, it's far superior to BANNED/WinZIP, also 7zip is FOSS while the ZIP/RAR are not.

However if you're looking to get them made up check the WB2010 thread. It's the latest WaveBubble revision and aqisnotliquid is doing board orders (~$13 shipped). If you need them to help you build a WB RC1b then from what I can see it's mainly cosmetic/ file changes, the PCBs are damn similar to the RC1a.

Locked
Please be positive and constructive with your questions and comments.

Return to “Wave Bubble”