Are these WBv1 or WB2010 PCB's

The operation of transmitters designed to jam or block wireless communications is a violation of the Communications Act of 1934, as amended ("Act"). See 47 U.S.C. Sections 301, 302a, 333. The Act prohibits any person from willfully or maliciously interfering with the radio communications of any station licensed or authorized under the Act or operated by the U.S. government. 47 U.S.C. Section 333. The manufacture, importation, sale or offer for sale, including advertising, of devices designed to block or jam wireless transmissions is prohibited. 47 U.S.C. Section 302a(b). Parties in violation of these provisions may be subject to the penalties set out in 47 U.S.C. Sections 501-510. Fines for a first offense can range as high as $11,000 for each violation or imprisonment for up to one year, and the device used may also be seized and forfeited to the U.S. government.

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
rvanscotter
 
Posts: 30
Joined: Tue Sep 14, 2010 11:04 am

Are these WBv1 or WB2010 PCB's

Post by rvanscotter »

Once you all stop laughing, let me know. There is nothing that makes me think they are 2010 but I want to be sure before I start ordering parts. I've read that some parts are no longer available for the v1, so it seems that the 2010 version is a good way to go... All I want is a fun project to build, if you have 2010 PCB's available i'm willing to sell/trade these PCB's.

Other than the EYEBEAM, adafruit industries, and "Can you hear me now Good", there are no other indications that I am aware of. But they do look different from the PCB's in the adafruit build guides.

Thanks everyone

Any parts recomendations or other useful advise will be appreciated, and I'm in the US.
Attachments
BVS_2780.JPG
BVS_2780.JPG (399.15 KiB) Viewed 3185 times

TheFallen
 
Posts: 94
Joined: Mon Feb 08, 2010 1:28 pm

Re: Are these WBv1 or WB2010 PCB's

Post by TheFallen »

Wavebubble 1. The parts are available, just some can be tricky to get, the LMX2433 PLL chip for example.

losthorizonmba
 
Posts: 31
Joined: Wed Sep 15, 2010 11:41 pm

LMX2433

Post by losthorizonmba »

Is the LMX2433TM/NOPB-ND from digi key the one required?
http://www.digikey.com/product-detail/e ... -ND/567747

Locked
Please be positive and constructive with your questions and comments.

Return to “Wave Bubble”