Fuses for RC1a

The operation of transmitters designed to jam or block wireless communications is a violation of the Communications Act of 1934, as amended ("Act"). See 47 U.S.C. Sections 301, 302a, 333. The Act prohibits any person from willfully or maliciously interfering with the radio communications of any station licensed or authorized under the Act or operated by the U.S. government. 47 U.S.C. Section 333. The manufacture, importation, sale or offer for sale, including advertising, of devices designed to block or jam wireless transmissions is prohibited. 47 U.S.C. Section 302a(b). Parties in violation of these provisions may be subject to the penalties set out in 47 U.S.C. Sections 501-510. Fines for a first offense can range as high as $11,000 for each violation or imprisonment for up to one year, and the device used may also be seized and forfeited to the U.S. government.

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
avo3
 
Posts: 5
Joined: Mon May 14, 2012 2:11 pm

Fuses for RC1a

Post by avo3 »

Hello,
Could anyone tell me what are the proper fuses for the atmega88 RC1a wavebubble.
Thank You

User avatar
lightningserpent
 
Posts: 57
Joined: Tue May 01, 2012 7:27 am

Re: Fuses for RC1a

Post by lightningserpent »

As long as it is an ATmega88 and not an 88p (I am sure I saw the p has different fuses) all you have to do is cd to the directory of the firmware you downloaded and type "make burn-fuse". I used the usbtiny for my ISP so I needed to modify the makefile and replace "avrisp" with "usbtiny". After I saved the file I opened a terminal and cd'd into the directory of the firmware and typed "sudo make burn-fuse" (the notes on the usbtiny page tell us we need to sudo). Avr did the rest because the firmware has the fuses loaded. Check out ladyada's picture on the make pages for a screen shot.

http://www.flickr.com/photos/ladyada/33 ... /lightbox/

Locked
Please be positive and constructive with your questions and comments.

Return to “Wave Bubble”