fixed wb 1.0b gerbers

The operation of transmitters designed to jam or block wireless communications is a violation of the Communications Act of 1934, as amended ("Act"). See 47 U.S.C. Sections 301, 302a, 333. The Act prohibits any person from willfully or maliciously interfering with the radio communications of any station licensed or authorized under the Act or operated by the U.S. government. 47 U.S.C. Section 333. The manufacture, importation, sale or offer for sale, including advertising, of devices designed to block or jam wireless transmissions is prohibited. 47 U.S.C. Section 302a(b). Parties in violation of these provisions may be subject to the penalties set out in 47 U.S.C. Sections 501-510. Fines for a first offense can range as high as $11,000 for each violation or imprisonment for up to one year, and the device used may also be seized and forfeited to the U.S. government.

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
bushing
 
Posts: 63
Joined: Tue Aug 14, 2007 5:34 am

fixed wb 1.0b gerbers

Post by bushing »

I used Eagle to rebuild the gerbers from the RC1a files; that fixed the silkscreen issue. I also took the opportunity to make a few small changes (moved some component IDs on the silkscreen to better places; made the LiPoly battery terminals smaller so that the protection board can be directly soldered to them.)

Let me know if you find any errors, because these are what I'm sending off to be made. Enjoy!

http://rapidshare.com/files/60401509/wb ... d.zip.html

(All files are 2.4, no zero suppression.)
-b

inh
 
Posts: 102
Joined: Mon Aug 27, 2007 6:49 am

new board design

Post by inh »

Hi I tried to open these in Eagle - after extracting - but can't - how should I do it?
rgds
Ian

bushing
 
Posts: 63
Joined: Tue Aug 14, 2007 5:34 am

Re: new board design

Post by bushing »

inh wrote:Hi I tried to open these in Eagle - after extracting - but can't - how should I do it?
rgds
Ian
Nope, these are the Gerber outputs from Eagle. The Eagle files in the Download section are correct; something went wrong when LadyAda made the Gerber files from them. (I'm guessing that it had to do with making the panel?)

If you want to look at the Gerber files, try something like http://www.softwarecompanions.com/gerbview.html
-b

User avatar
aqisnotliquid
 
Posts: 117
Joined: Mon Oct 06, 2008 10:46 pm

Re: fixed wb 1.0b gerbers

Post by aqisnotliquid »

Well, here's something that people have been looking for...

A Gerber editor!

If you know how Gerber files work, have fun with it. You should be able to merge bushing's gerbers into one panel with this program, but I haven't had time to figure out how yet.

http://www.viewplot.com/

kavin6
 
Posts: 3
Joined: Mon Dec 29, 2008 2:11 am

Re: fixed wb 1.0b gerbers

Post by kavin6 »

Hi all
Can anyone please upload this in http://www.mediafire.com
I cannot access rapidshare
Thanks in advance

Mushupork
 
Posts: 3
Joined: Fri Dec 26, 2008 7:08 pm

Re: fixed wb 1.0b gerbers

Post by Mushupork »

kavin6 wrote:Hi all
Can anyone please upload this in http://www.mediafire.com
I cannot access rapidshare
Thanks in advance

upload at http://www.mediafire.com/?sharekey=7642 ... 2c3397412a

kavin6
 
Posts: 3
Joined: Mon Dec 29, 2008 2:11 am

Re: fixed wb 1.0b gerbers

Post by kavin6 »

Mushupork wrote:
kavin6 wrote:Hi all
Can anyone please upload this in http://www.mediafire.com
I cannot access rapidshare
Thanks in advance

upload at http://www.mediafire.com/?sharekey=7642 ... 2c3397412a
Thanks a lot :D

User avatar
amigomaxwell
 
Posts: 18
Joined: Sat Jan 17, 2009 1:10 am

Re: fixed wb 1.0b gerbers

Post by amigomaxwell »

bushing, could you upload the .brd files as well ?

Cheers

antares
 
Posts: 29
Joined: Wed Feb 13, 2008 5:16 pm

Re: fixed wb 1.0b gerbers

Post by antares »

Good luck talking to bushing. He has not been active any more since December 2007.

Locked
Please be positive and constructive with your questions and comments.

Return to “Wave Bubble”