Variant of the scheme for BMX???

SpokePOV kit for bikes

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
flatron
 
Posts: 8
Joined: Wed Jul 15, 2009 12:59 am

Variant of the scheme for BMX???

Post by flatron »

Good afternoon, such variant of the scheme will work?????
Very much I look forward to hearing!!!!
Attachments
shm.rar
(31.94 KiB) Downloaded 264 times

flatron
 
Posts: 8
Joined: Wed Jul 15, 2009 12:59 am

Re: Variant of the scheme for BMX???

Post by flatron »

Dear experts your opinion is necessary

kayrock66
 
Posts: 150
Joined: Tue Oct 09, 2007 1:06 am

Re: Variant of the scheme for BMX???

Post by kayrock66 »

We don't understand your question. Please restate.

flatron
 
Posts: 8
Joined: Wed Jul 15, 2009 12:59 am

Re: Variant of the scheme for BMX???

Post by flatron »

Forgive me for my English, I very badly speak in this language, I wish to know the scheme awakes to work provided that I have cleaned a part of components?

kayrock66
 
Posts: 150
Joined: Tue Oct 09, 2007 1:06 am

Re: Variant of the scheme for BMX???

Post by kayrock66 »

What language do you normally speak? Does that .rar file have any connection to your query?

flatron
 
Posts: 8
Joined: Wed Jul 15, 2009 12:59 am

Re: Variant of the scheme for BMX???

Post by flatron »

I well speak in Russian and on Ukrainski, shm.rar, it is the scheme, I have cleaned superfluous components for me, and wished to know быдет it to work?

kayrock66
 
Posts: 150
Joined: Tue Oct 09, 2007 1:06 am

Re: Variant of the scheme for BMX???

Post by kayrock66 »

If you post an image file (not .rar) I, and likely many others will look at it for you. Congratualations, your English is better than my Russian.

flatron
 
Posts: 8
Joined: Wed Jul 15, 2009 12:59 am

Re: Variant of the scheme for BMX???

Post by flatron »

Here a picture
Attachments
1.jpg
1.jpg (169.28 KiB) Viewed 3870 times

kayrock66
 
Posts: 150
Joined: Tue Oct 09, 2007 1:06 am

Re: Variant of the scheme for BMX???

Post by kayrock66 »

Okay this looks like you desire to make a BMX (short) Spoke POV that one has LEDs on one side of the board/bike. Looks like missed the J2 connector :oops: used to upload new images to the EEPROM or flash new firmware into the microcontroller if you ever want to do that as well. Apart from that it looks okay. :P

flatron
 
Posts: 8
Joined: Wed Jul 15, 2009 12:59 am

Re: Variant of the scheme for BMX???

Post by flatron »

Forgive I has not understood, the device will work?
I am going to program with the help ponyprog what as much as possible to reduce the scheme

kayrock66
 
Posts: 150
Joined: Tue Oct 09, 2007 1:06 am

Re: Variant of the scheme for BMX???

Post by kayrock66 »

No the device will not work. You have provided no mechanism to upload new pictures to the EEPROM as would ordinarily be done with this design.

If you had the EEPROM pre-programmed either as it comes in the kit or in another SpokePOV device that did have the J2 connector it could be made to work, but would not be recommended. You're going to want to easily and quickly change images as you create your digital image masterpiece.

If you're doing your own board, you might consider a 3 battery design, perhaps using AAA cells to fit, so you can have the more exotic colors like pink, blue, green, white.

flatron
 
Posts: 8
Joined: Wed Jul 15, 2009 12:59 am

Re: Variant of the scheme for BMX???

Post by flatron »

If to leave J2 that device will work, I have correctly understood you?

adafruit
 
Posts: 12151
Joined: Thu Apr 06, 2006 4:21 pm

Re: Variant of the scheme for BMX???

Post by adafruit »

you do realize that you can use the existing design and just cut off the bottom 2" of the PCB, right?

kayrock66
 
Posts: 150
Joined: Tue Oct 09, 2007 1:06 am

Re: Variant of the scheme for BMX???

Post by kayrock66 »

flatron- yes, with J2, you will have a working design. And Ladyada is correct, the original SpokePOV design was done in a clever way with the intention of being able to cut off the last 8 LEDs and battery to fit on a BMX bike. I myself ran a pair of her boards assembled in this manner.

flatron
 
Posts: 8
Joined: Wed Jul 15, 2009 12:59 am

Re: Variant of the scheme for BMX???

Post by flatron »

OK, I leave J2, my purpose to make only on the one hand LEDs

Locked
Please be positive and constructive with your questions and comments.

Return to “SpokePOV (discontinued)”