Hi, I keep getting the IO ERROR: died at address 0 error. I'm using the serial port method, I've also tried it with and without GiveIO. I've tried all the different methods of starting it, e.g. 'Power on SpokePOV first, then plug in, then do a hard reset, then start the software' etc...
Everything is soldered correctly, and my serial ports are enabled in the BIOS settings.
I have also tried it in both COM ports, which I obviously worked out it is COM2.
Is there anything else I can do to upload an image onto my SpokePOV? I realise now if I would have gone with the parallel option, it would have worked.
I also installed Python, wxPython and pySerial, just in case it made a difference.
Trying to put image onto SpokePOV, not working :(
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
-
- Posts: 9
- Joined: Mon Aug 07, 2006 3:25 pm
-
- Posts: 7
- Joined: Mon Aug 14, 2006 10:34 pm
I had (have) the same problem with the parallel also so that would not have helped you. And reading other posts of those with the same problem (with no reply) it seems like a problem with the spokepov software. Try the following: Make sure batteries are brand new,change pc's, run linux, shorten or loop cord (worked on mine but still get died at 1024) re-download and install giveio, pray to gods of serial data (Maybe even a sacrifice), or drink fifth of JD,pee on circuit board and go watch TV(also worked for me!)
-
- Posts: 9
- Joined: Mon Aug 07, 2006 3:25 pm
Yeah you're probably right, I fried one SpokePOV already, so finding out this one isn't working peed me off a bit, the only thing I can think of right now is buying a parallel port one, and if that doesn't work trying it on another PC, and if that doesn't work, wire up the SpokePOV to be a timer for a bomb... once all the LEDs are activated... BOOM!Jagger wrote:I had (have) the same problem with the parallel also so that would not have helped you. And reading other posts of those with the same problem (with no reply) it seems like a problem with the spokepov software. Try the following: Make sure batteries are brand new,change pc's, run linux, shorten or loop cord (worked on mine but still get died at 1024) re-download and install giveio, pray to gods of serial data (Maybe even a sacrifice), or drink fifth of JD,pee on circuit board and go watch TV(also worked for me!)
Then go have a pint of strongbow, a pack of peanuts, and go watch TV.
-
- Posts: 9
- Joined: Mon Aug 07, 2006 3:25 pm
-
- Posts: 9
- Joined: Mon Aug 07, 2006 3:25 pm
Yep, as expected it works on other PCs, it must be something wrong with my services, or serial port, it's gonna take a little while getting use to the software (like testing out different things that look good and what don't, but yeah overall it's a great project.
Thanks Ladyada, and I hope you carry on creating more fun, educational toys
Thanks Ladyada, and I hope you carry on creating more fun, educational toys
Please be positive and constructive with your questions and comments.