pov port com15
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
-
- Posts: 2
- Joined: Wed Feb 28, 2007 2:08 pm
pov port com15
I bought a Radio Shack USB to serial device, installed it and it seems to attach to com15, judging by what it says in device manager. I don't seem to be able to configure com15 as a choice in the spokePOV program. What should I do? I don't know how to set it to another com port, or if that's possible.
-
- Posts: 12151
- Joined: Thu Apr 06, 2006 4:21 pm
y0w! COM15 is quite a high number. I would suggest going to the device manager, then select "properties" (right click) on the COM port in question. then select "port settings" and "advanced" and try setting it to a lower number. the SpokePOV software can't support higher than COM9 (something about the COM library im using)
note that theres not guarantee that the radioshack adapter will work!
note that theres not guarantee that the radioshack adapter will work!
Please be positive and constructive with your questions and comments.