I bought 3 SpokePOV bundle some years ago. I recently decided to try to program it with a USBTiny I bought more recently.
I've tried using SpokePOV 1.4 with a USBTiny and always get 32 banks with every bank 100% red. I've used the USBTiny to program other AVRs.
I dug out the serial dongle that came with my kit and see 4 banks with the original images downloaded from each bank.
I'd like to be able to use the USBTiny for several reasons.
Does anyone have any ideas why it works this way?
usbtiny=32 banks all red, serial dongle=ops normal
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
-
- Posts: 6
- Joined: Sat Feb 27, 2010 12:03 pm
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: usbtiny=32 banks all red, serial dongle=ops normal
And it worked fine for those? Are there any error messages when using it with the SpokePOVs?I've used the USBTiny to program other AVRs.
-
- Posts: 6
- Joined: Sat Feb 27, 2010 12:03 pm
Re: usbtiny=32 banks all red, serial dongle=ops normal
I've used my USBTiny to program ATTiny 85s and ATTiny 84s with no problems.
There are no error messages from SpokePOV 1.4.
There are no error messages from SpokePOV 1.4.
Please be positive and constructive with your questions and comments.