Not working out.
Moderators: adafruit_support_bill, adafruit

Not working out.

by jaigh_taylor on Tue Oct 06, 2009 5:05 pm

As many that have come before me, I'm throwing in the towel on the laser engraving business. The leasing company in question will allow a lease transfer to someone who meets their credit requirements.

For details, please contact me at jay (at) overvolt (dot) net.

The equipment in question is:

45 Watt Epilog Mini 24 with very light use. Rotary attachment
Electrocorp RSU12-CCHR with 1 or two pre-filters left.
jaigh_taylor
 
Posts: 12
Joined: Wed Sep 24, 2008 10:04 am

Re: Not working out.

by tytower on Thu Oct 08, 2009 4:10 pm

Better start with what part of the world are you in . Then when you have considered that and why thats needed perhaps you could add the other necessary details a purchaser might want to know
tytower
 
Posts: 61
Joined: Thu Sep 17, 2009 11:47 pm

Re: Not working out.

by jaigh_taylor on Sun Oct 25, 2009 12:01 pm

Probably a good idea! Here are a few more details:

The machine is currently located in Southern Colorado and has original packaging.

Lease payments without insurance and property tax are $375. One year has been paid down on a four year equipment lease that has a 10% buy option at the end of the lease term.

Again, if you have any questions please contact me at jay@overvolt.net.

--Jason
jaigh_taylor
 
Posts: 12
Joined: Wed Sep 24, 2008 10:04 am

Re: Not working out.

by Solarbotics on Thu Oct 29, 2009 5:11 pm

Take a look here:
http://www.usedlasers.com/content/view/147/1/

They say they're looking for Helix minis, but I don't know what they can do about your lease.

Regards,
Dave
Solarbotics
 
Posts: 2
Joined: Thu Oct 29, 2009 5:09 pm

Re: Not working out.

by jaigh_taylor on Thu Nov 05, 2009 12:12 pm

Solar,

Thanks for the heads up. I've contacted them but it seems that they're being...less than helpful.

Thanks again though!
jaigh_taylor
 
Posts: 12
Joined: Wed Sep 24, 2008 10:04 am

Re: Not working out.

by jaigh_taylor on Fri Dec 18, 2009 11:21 am

Good news! The machine got sold a week ago. I still owe a bit on the lease, but $3000 is significantly less than what I did owe. ;)

I do have a barely-used container of ceramark LMM-6000 that needs to find a new home, as well as the aforementioned filtration system.
jaigh_taylor
 
Posts: 12
Joined: Wed Sep 24, 2008 10:04 am

Re: Not working out.

by 250 Coupe on Fri Jan 08, 2010 3:47 am

Jason,
Sorry to hear it didn't work out. I stuck my lease out to the end but dang it was a lot of money for not much bang.

My $29,995 machine cost me $60,000 after interest and whatnot. Thankfully, it was a $1 buyout lease so I own it outright now. I've made nearly $5000 in eight years.

Let me know what you want for the cermark, it's hard to ship due to flamability concerns.

Michael,
Still drifting along without a business plan (or a clue for that matter).
70W Epilog Legend 24, bought it new in December 2002
250 Coupe
 
Posts: 27
Joined: Fri Jan 08, 2010 3:33 am