Thermark/Cermark

Share your information, hints and discuss Laser cutters/engravers

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
LBurger71
 
Posts: 11
Joined: Fri Apr 20, 2007 6:19 pm

Thermark/Cermark

Post by LBurger71 »

Hello all!

I have been sitting here for probably over an hour trying to figure out how much thermark/cermark I will need to order. I see the 12 oz spray can is going to run me about $65. A bottle of 250 grams is going to run me between $130 and $150. Am I better off buying the spray can for now to see how much I will use? I just want to get the best value for my money. I'd hate to spend $65 on only 12 oz. But if I buy the 250 grams I will probably have to spend another $18 on the sprayer right?

Another thing that confuses me. On the Thermark site they have Thermark for "shiny metals" and Thermark for aluminum. I can't use the same product for shiny metals and aluminum? Plus I see Thermark for glass and tile. Since I plan on doing glass and tile I will need another Thermark product for that? Thanks for any help. I want to put an order out without getting too much product, and buy the correct stuff.

Lisa

LaserGregg
 
Posts: 40
Joined: Tue Apr 10, 2007 9:51 pm

Cermark/Thermark

Post by LaserGregg »

get the LMM 6000 it works.
my epilog guy gave me some to start with.
it works.

ahaley
 
Posts: 2
Joined: Sun Jan 27, 2008 4:14 pm

Post by ahaley »

Anyone have experience with the other Thermark products? Any tips and tricks to share?

Locked
Please be positive and constructive with your questions and comments.

Return to “Laser”