Edsal Stand.

Share your information, hints and discuss Laser cutters/engravers

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
jaigh_taylor
 
Posts: 12
Joined: Wed Sep 24, 2008 11:04 am

Edsal Stand.

Post by jaigh_taylor »

Quick question: Did you guys have to poke holes in the third shelf to accommodate mounting the drawer?

adafruit
 
Posts: 12151
Joined: Thu Apr 06, 2006 4:21 pm

Re: Edsal Stand.

Post by adafruit »

yes. wasnt too tough tho. just use a portable drill

jaigh_taylor
 
Posts: 12
Joined: Wed Sep 24, 2008 11:04 am

Re: Edsal Stand.

Post by jaigh_taylor »

I figured. Another odd question (I seem to be full of them!): Is there a pressure relief valve off of the air-assist solenoid? I ask because I picked up my Mini 24 yesterday and upon hooking up the air assist, it just blows and blows and blows, but not out of the air assist tube. I opened the back and it looks like there's supposed to be something there that is not. I have a call into support about the issue, but was wondering if you could offer any insight?

adafruit
 
Posts: 12151
Joined: Thu Apr 06, 2006 4:21 pm

Re: Edsal Stand.

Post by adafruit »

dont have air assist, sorry!

Locked
Please be positive and constructive with your questions and comments.

Return to “Laser”