Bad 2.1mm DC Plug Adapter

Breakout boards, sensors, other Adafruit kits, etc.

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
jschweers
 
Posts: 2
Joined: Mon May 10, 2010 5:45 pm

Bad 2.1mm DC Plug Adapter

Post by jschweers »

I ordered a male and female adapter so I could hook up an EL wire inverter and a battery pack.
I first wired the inverter and batteries by directly twisting the wires together and every thing works fine.
I then attached the male and female adapters and it did not work.
I tested the adapters with a multi-meter continuity setting. There is no continuity between the positive
terminal and the positive (inside) portion of the male plug. The negative side is fine, and the female adapter checks otu
fine and positive and negative.

User avatar
pburgess
 
Posts: 4161
Joined: Sun Oct 26, 2008 2:29 am

Re: Bad 2.1mm DC Plug Adapter

Post by pburgess »

Hi there. Email [email protected] and include a link to this thread, and we'll get a replacement out to you!

Locked
Please be positive and constructive with your questions and comments.

Return to “Other Products from Adafruit”