I am constructing RPi data loggers for the field and they need to be battery powered. I purchased the USB shell #1390 and the UBEC converter #1385. Unfortunately I have been unable to find a picture of the usb pin configuration, at least a consistent one. I understand that to make it a dedicated power cable, I tie the 2 data ports together but I cannot determine, which is which. There are 5 pins, 3 on top, 2 on bottom (depending on how you look at it). Can you tell or include an image of the pin configuration? I greatly appreciate it.
Mike
construction of micro usb power cord for RPi
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- mglenn12
- Posts: 39
- Joined: Thu Dec 12, 2013 11:56 am
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: construction of micro usb power cord for RPi
How's this:
- mglenn12
- Posts: 39
- Joined: Thu Dec 12, 2013 11:56 am
Re: construction of micro usb power cord for RPi
thank you very much. I greatly appreciate the time and effort. Mike
Please be positive and constructive with your questions and comments.