Hi,
Since I need audio I decided to order the 5.6" Display & Audio 1280x800 (720p) Kit (PRODUCT ID: 1695).
I'd like to use headphones with it, instead of speakers. So can anyone please tell me what I'd need to do to make that work without damaging the headphones? The ones I want to use are quite expensive.
My first thought was to just use resistors to attenuate but I'd appreciate an expert insight.
Thanks
Use of headphones with 5.6" Display & Audio 1280x800
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
-
- Posts: 7
- Joined: Thu Jul 10, 2014 5:19 am
- adafruit2
- Posts: 22200
- Joined: Fri Mar 11, 2005 7:36 pm
Re: Use of headphones with 5.6" Display & Audio 1280x800
Oof - you would have to solder to the board before the amplifier. We're going to have to say its possible but we have no documentation or details or tutorials on how, and its not a good idea to risk your nice headphones - if there's DC bias or high voltages it could damage your cans!
-
- Posts: 7
- Joined: Thu Jul 10, 2014 5:19 am
Re: Use of headphones with 5.6" Display & Audio 1280x800
Ok, thanks for the response. I'll try a separate HDMI audio extractor or something instead.
Please be positive and constructive with your questions and comments.