Hi adafruit,
I have an Adafruit CC3000 Breakout and would like to upgrade its firmware (from 1.24 to 1.28). I also have the MSP430 MCU from TI , http://www.ti.com/tool/msp-exp430fr5739, as well as their upgrade code. Can I get some instructions on how do I come about wiring the ICs and upgrading the firmware?
Regards,
Kam
CC3000 Firmware upgrade
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- Franklin97355
- Posts: 23910
- Joined: Mon Apr 21, 2008 2:33 pm
Re: CC3000 Firmware upgrade
Here is what ti has to say about it. http://processors.wiki.ti.com/index.php ... hing_Guide
-
- Posts: 5
- Joined: Tue Jul 08, 2014 1:29 pm
Re: CC3000 Firmware upgrade
hi franklin97355,
Thanks for your help, but I am not sure how to connect the pins since I am using the Adafruit CC3000 breakout instead of TI's CC3000 EM Board.
Regards,
Kam
Thanks for your help, but I am not sure how to connect the pins since I am using the Adafruit CC3000 breakout instead of TI's CC3000 EM Board.
Regards,
Kam
-
- Posts: 5
- Joined: Tue Jul 08, 2014 1:29 pm
Re: CC3000 Firmware upgrade
Okay, I got the it upgraded.
Thanks and Regards,
Kam
Thanks and Regards,
Kam
Please be positive and constructive with your questions and comments.