USB/DC/Solar Lithium ion polymer charger board size ID:390
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- waterglass
- Posts: 6
- Joined: Tue May 29, 2012 1:50 pm
USB/DC/Solar Lithium ion polymer charger board size ID:390
I was looking for the location of the mounting holes for the USB/DC/Solar Lithium ion polymer charger. This information was not included in the technical details so I went the Github repository and download the schematic and layout as directed by technical details section of the web page for the charger. I used Eagle, eagleUp, and sketch up 8 to create a 3D model of the board. I used the dimension tool to find the board size and mounting hole locations. The board in the file seems to be larger (45 mm x 38 mm) than the one received (41mm x 33mm). Would you explain why there is a mismatch between the posted file and actual board? Would you post or provide a mechanical drawing showing the board dimension and mounting hole locations?
- Attachments
-
- usb_dc_li_battery_charger_eagle_pcb_layout_crop2.jpg (326 KiB) Viewed 289 times
- adafruit_support_bill
- Posts: 88096
- Joined: Sat Feb 07, 2009 10:11 am
Re: USB/DC/Solar Lithium ion polymer charger board size ID:3
May have been a board rev. I'll check into it.
- Bel_Z_Bub
- Posts: 263
- Joined: Wed Jun 04, 2014 1:58 pm
Re: USB/DC/Solar Lithium ion polymer charger board size ID:3
definatly an old image the pinouts are located on different locations as well. I also had to do a redesign in my project when I received it.
- adafruit2
- Posts: 22148
- Joined: Fri Mar 11, 2005 7:36 pm
Re: USB/DC/Solar Lithium ion polymer charger board size ID:3
Ooh, yah we revised the board quite a bit. Check it out here, just uploaded!
https://github.com/adafruit/USB-DC-Sola ... er-charger
https://github.com/adafruit/USB-DC-Sola ... er-charger
Please be positive and constructive with your questions and comments.