Hi there, I'm completely new to AVR's and microcontrollers and I've been trying to set up the software needed to program my ATMEGA328p with my new USBtinyISP.
I am having a difficult time using my USBtinyISP with AVR Studio 4. I went through the tutorial listed here http://www.ladyada.net/make/usbtinyisp/ ... ompat.html and made my way to the part where the USBtiny500 application should tell me that the status is ready. I ended up getting it working to where the application told me "Status: Ready" a few times, but now it's saying that it's failed and can not find the USBtiny.
How do I let it know that my USBtiny is connected? I have already installed the drivers correctly so I know that isn't the problem.
Before I had the "Cannot find USBtinyISP" error, the USBtiny500 application told me that the status was ready and so I moved on. When I opened up AVR Studio to select my programmer I clicked on the CON button on the toolbar. I chose AVRISP and COM2.
This, however, didn't work and the banner then read "Connect Failed".
This has all been a bit confusing to me and I would appreciated any help in fixing my problem. Just to refresh I have a USBtinyISP and would like to program my ATMEGA328p with AVR Studio 4. Thanks for your help
-David
USBtinyISP with AVR Studio 4
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
-
- Posts: 12151
- Joined: Thu Apr 06, 2006 4:21 pm
Re: USBtinyISP with AVR Studio 4
the avrstudio thing is a little hacky. try avrdude which works much better. also try selecting STK500.
-
- Posts: 2
- Joined: Sun Jan 09, 2011 7:24 pm
Re: USBtinyISP with AVR Studio 4
Alright, will do. Thanks
-
- Posts: 1
- Joined: Wed Oct 31, 2012 10:15 pm
Re: USBtinyISP with AVR Studio 4
do you fix the problem?I also has one error "connected failed" with you
Please be positive and constructive with your questions and comments.