Can someone point me to the stuff I have to do to use this with the Arduino IDE?
Thanks
Using USBTinyISP with Arduino IDE
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
-
- Posts: 12151
- Joined: Thu Apr 06, 2006 4:21 pm
- normlane
- Posts: 128
- Joined: Thu Apr 01, 2010 5:39 pm
Re: Using USBTinyISP with Arduino IDE
I forgot to mention that I wanted to load sketches rather than just the bootloader. I finally remembered to edit boards.txt which was the missing piece. I haven't seen any reference to that so you might want to add something.
-
- Posts: 12151
- Joined: Thu Apr 06, 2006 4:21 pm
Re: Using USBTinyISP with Arduino IDE
Press shift while uploading in IDE 1.0
- rob drizzle
- Posts: 127
- Joined: Wed May 04, 2011 6:14 pm
Re: Using USBTinyISP with Arduino IDE
Can you please explain this further? Also, can changing the board.txt take the place of changing configurations through AVRDUDE? Meaning if I add this to the board.txt file:adafruit wrote:Press shift while uploading in IDE 1.0
lopower.name=Arduino Ultru Low-Power (<2.4V, 8 MHz) w/ ATmega328
lopower.upload.protocol=stk500
lopower.upload.maximum_size=30720
lopower.upload.speed=57600
lopower.bootloader.low_fuses=0xFF
lopower.bootloader.high_fuses=0xDA
lopower.bootloader.extended_fuses=0x06
lopower.bootloader.path=atmega
lopower.bootloader.file=ATmegaBOOT_168_atmega328_pro_8MHz.hex
lopower.bootloader.unlock_bits=0x3F
lopower.bootloader.lock_bits=0x0F
lopower.build.mcu=atmega328p
lopower.build.f_cpu=8000000L
lopower.build.core=arduino
would I still have to use the ISP and AVRDUDE?
Thanks.
-
- Posts: 12151
- Joined: Thu Apr 06, 2006 4:21 pm
Re: Using USBTinyISP with Arduino IDE
hi rob!
please do not post new questions on older threads. if you have a new question, start a new thread, and be clear about what your question is and we can help you!
thank you!
adafruit support
please do not post new questions on older threads. if you have a new question, start a new thread, and be clear about what your question is and we can help you!
thank you!
adafruit support
Please be positive and constructive with your questions and comments.