I've finished building my USBtinyISP kit purchased from Evil Mad Science and will be connecting it to an EMS target board (also available from Adafruit) as shown below.
There is a white arrow pointing to the lower left pin of ISP_6 in the photo below. Do I connect the USBtinyISP with the red-striped lead going to that pin?
Thanks,
Jake
How to connect 6 pin cable to ICSP connector?
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
-
- Posts: 8
- Joined: Mon Jul 09, 2012 9:53 am
- adafruit_support_bill
- Posts: 88092
- Joined: Sat Feb 07, 2009 10:11 am
Re: How to connect 6 pin cable to ICSP connector?
Yes. The arrow and the red stripe should both indicate pin 1.
-
- Posts: 8
- Joined: Mon Jul 09, 2012 9:53 am
Please be positive and constructive with your questions and comments.