I build my USBtinyISP myselve, soldered it and now i am trying to write the ATtiny2313 for it.
The Facts:
- I build version 1.0
I build the serial programmer from here: http://s-huehn.de/elektronik/avr-prog/avr-prog.htm
I can write (and read) the Test1.hex from the same Page with avrdude -p attiny2313 -c siprog -P COM1 -U eeprom:w:Test1.hex -vvv
Ponyprog says always "unknown or missing device"
Code: Select all
ladyada.net/media/usbtinyisp/usbtinyisp v1.0 firm.zip/usbtinyisp/spi/main.hex
Code: Select all
avrdude -p attiny2313 -c siprog -P COM1 -U eeprom:w:main.hex -vvv
Code: Select all
avrdude: reading input file "main.hex"
avrdude: input file main.hex auto detected as Intel Hex
avrdude: ERROR: address 0x0090 out of range at line 9 of main.hex
avrdude: write to file 'main.hex' failed
thanks for help