Hello,
Recently I purchased the "Starter Pack for Arduino (Arduino Uno included)". Today, I tried plugging in my Arduino to my computer as usual and my PC responded with "USB Device Not Recognized". I've tried uninstalling and updating the drivers to no avail. After further researching the problem, it seems that others have been plagued with the same exact issue, and the only solution seems to be replacing the board. I would like to know if there is anything I can do on my side to fix this problem. I purchased the Arduino for a time-critical project and cannot have any further delays.
Thank you in advance,
Rob
Arduino Uno - Device Not Recognized
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: Arduino Uno - Device Not Recognized
Just to be sure it is the same problem, find the driver install log: C:\Windows\inf\setupapi.dev.log.
Look for the record of your device install (the entries will be time-stamped).
If it says:
it is the same problem.
If it says:
the problem is something else.
Look for the record of your device install (the entries will be time-stamped).
If it says:
Code: Select all
{DIF_UPDATEDRIVER_UI} 16:36:42.599
dvi: No class installer for 'Unknown Device'
it is the same problem.
If it says:
Code: Select all
dvi: No class installer for 'Arduino Uno'
-
- Posts: 3
- Joined: Fri Mar 18, 2011 12:00 pm
Re: Arduino Uno - Device Not Recognized
It seems like the arduino is labeled as an unknown device, but just in case I missed something, here is the portion of the file that corresponds to yesterday.
What causes this to happen? Is the ATMega8U2 malfunctioning?
Code: Select all
>>> [Device Install (Hardware initiated) - USB\VID_0000&PID_0000\5&c19c4f&0&2]
>>> Section start 2011/03/18 11:31:20.650
ump: Creating Install Process: DrvInst.exe 11:31:20.651
ndv: Retrieving device info...
ndv: Setting device parameters...
ndv: Building driver list...
dvi: {Build Driver List} 11:31:20.702
dvi: Searching for hardware ID(s):
dvi: usb\unknown
dvi: Searching for compatible ID(s):
dvi: usb\unknown
dvi: Enumerating INFs from path list 'C:\Windows\INF'
inf: Opened PNF: 'C:\Windows\System32\DriverStore\FileRepository\usb.inf_98a6b4ed\usb.inf' ([strings.0409] <src=drvstore>)
dvi: Created Driver Node:
dvi: HardwareID - USB\UNKNOWN
dvi: InfName - C:\Windows\System32\DriverStore\FileRepository\usb.inf_98a6b4ed\usb.inf
dvi: DevDesc - Unknown Device
dvi: DrvDesc - Unknown Device
dvi: Provider - Microsoft
dvi: Mfg - (Standard USB Host Controller)
dvi: ModelsSec - Generic.Section.NTx86
dvi: InstallSec - BADDEVICE.Dev
dvi: ActualSec - BADDEVICE.Dev.NT
dvi: Rank - 0x0dff0000
dvi: Signer - microsoft windows
dvi: Signer Score - INBOX
dvi: DrvDate - 06/21/2006
dvi: Version - 6.0.6001.18000
inf: Searched 1 potential matches in published INF directory
inf: Searched 46 INFs in directory: 'C:\Windows\INF'
dvi: {Build Driver List - exit(0x00000000)} 11:31:20.825
ndv: Selecting best match...
dvi: {DIF_SELECTBESTCOMPATDRV} 11:31:20.825
dvi: No class installer for 'Universal Serial Bus controllers'
dvi: No CoInstallers found
dvi: Default installer: Enter 11:31:20.832
dvi: {Select Best Driver}
dvi: Selected driver installs from section [BADDEVICE.Dev] in 'c:\windows\system32\driverstore\filerepository\usb.inf_98a6b4ed\usb.inf'.
dvi: Class GUID of device changed to: {36fc9e60-c465-11cf-8056-444553540000}.
dvi: Set selected driver complete.
dvi: Selected:
dvi: Description - [Unknown Device]
dvi: InfFile - [c:\windows\system32\driverstore\filerepository\usb.inf_98a6b4ed\usb.inf]
dvi: Section - [BADDEVICE.Dev]
dvi: Signer - [microsoft windows]
dvi: Rank - [0x0dff0000]
dvi: {Select Best Driver - exit(0x00000000)}
dvi: Default installer: Exit
dvi: {DIF_SELECTBESTCOMPATDRV - exit(0x00000000)} 11:31:20.835
ndv: Driver selected, now performing install...
ndv: {Core Device Install}
inf: Opened PNF: 'C:\Windows\INF\usb.inf' ([strings.0409] <src=drvstore>)
inf: Opened PNF: 'C:\Windows\INF\usb.inf' ([strings.0409] <src=drvstore>)
dvi: {DIF_ALLOW_INSTALL} 11:31:20.898
dvi: No class installer for 'Unknown Device'
dvi: No CoInstallers found
dvi: Default installer: Enter 11:31:20.900
dvi: Default installer: Exit
dvi: {DIF_ALLOW_INSTALL - exit(0xe000020e)} 11:31:20.900
ndv: Installing files...
dvi: {DIF_INSTALLDEVICEFILES} 11:31:20.901
dvi: No class installer for 'Unknown Device'
dvi: Default installer: Enter 11:31:20.902
dvi: {Install FILES}
inf: Opened PNF: 'c:\windows\system32\driverstore\filerepository\usb.inf_98a6b4ed\usb.inf' ([strings.0409] <src=drvstore>)
inf: {Install Inf Section [BADDEVICE.Dev.NT]}
inf: CopyFiles=BADDEVICE.CopyFiles (usb.inf line 102)
! inf: Empty Section! [BADDEVICE.CopyFiles]
inf: No (Copy/Ren/Del)Files directives found
inf: {Install Inf Section [BADDEVICE.Dev.NT] exit (0x00000000)}
dvi: Processing co-installer registration section [BADDEVICE.Dev.NT.CoInstallers].
inf: {Install Inf Section [BADDEVICE.Dev.NT.CoInstallers]}
inf: No (Copy/Ren/Del)Files directives found
inf: {Install Inf Section [BADDEVICE.Dev.NT.CoInstallers] exit (0x00000000)}
dvi: Co-installers registered.
dvi: {Install INTERFACES}
dvi: Installing section [BADDEVICE.Dev.NT.Interfaces]
dvi: {Install INTERFACES exit 00000000}
dvi: {Install FILES exit (0x00000000)}
dvi: Default installer: Exit
dvi: {DIF_INSTALLDEVICEFILES - exit(0x00000000)} 11:31:20.907
ndv: Pruning file queue...
dvi: {_SCAN_FILE_QUEUE}
flq: ScanQ flags=620
flq: SPQ_SCAN_PRUNE_COPY_QUEUE
flq: SPQ_SCAN_FILE_COMPARISON
flq: SPQ_SCAN_ACTIVATE_DRP
flq: ScanQ number of copy nodes=0
flq: ScanQ action=200 DoPruning=32
flq: ScanQ end Validity flags=620 CopyNodes=0
dvi: {_SCAN_FILE_QUEUE exit(0, 0x00000000)}
ndv: Committing file queue...
flq: {_COMMIT_FILE_QUEUE}
flq: CommitQ DelNodes=0 RenNodes=0 BackNodes=0 CopyNodes=0
flq: {_COMMIT_FILE_QUEUE exit(0x00000000)}
ndv: Registering CoInstallers...
dvi: {DIF_REGISTER_COINSTALLERS} 11:31:20.912
dvi: No class installer for 'Unknown Device'
dvi: Default installer: Enter 11:31:20.914
inf: Opened PNF: 'c:\windows\system32\driverstore\filerepository\usb.inf_98a6b4ed\usb.inf' ([strings.0409] <src=drvstore>)
inf: {Install Inf Section [BADDEVICE.Dev.NT.CoInstallers]}
inf: {Install Inf Section [BADDEVICE.Dev.NT.CoInstallers] exit (0x00000000)}
dvi: Co-installers registered.
dvi: Default installer: Exit
dvi: {DIF_REGISTER_COINSTALLERS - exit(0x00000000)} 11:31:20.917
ndv: Installing interfaces...
dvi: {DIF_INSTALLINTERFACES} 11:31:20.918
dvi: No class installer for 'Unknown Device'
dvi: No CoInstallers found
dvi: Default installer: Enter 11:31:20.919
dvi: {Install INTERFACES}
inf: Opened PNF: 'c:\windows\system32\driverstore\filerepository\usb.inf_98a6b4ed\usb.inf' ([strings.0409] <src=drvstore>)
dvi: Installing section [BADDEVICE.Dev.NT.Interfaces]
dvi: {Install INTERFACES exit 00000000}
dvi: Default installer: Exit
dvi: {DIF_INSTALLINTERFACES - exit(0x00000000)} 11:31:20.921
ndv: Installing device...
dvi: {DIF_INSTALLDEVICE} 11:31:20.922
dvi: No class installer for 'Unknown Device'
dvi: Default installer: Enter 11:31:20.922
dvi: {Install DEVICE}
inf: Opened PNF: 'c:\windows\system32\driverstore\filerepository\usb.inf_98a6b4ed\usb.inf' ([strings.0409] <src=drvstore>)
dvi: Processing Registry/Property directives...
inf: {Install Inf Section [BADDEVICE.Dev.NT]}
inf: AddReg=BADDEVICE.AddReg (usb.inf line 101)
inf: {Install Inf Section [BADDEVICE.Dev.NT] exit (0x00000000)}
inf: {Install Inf Section [BADDEVICE.Dev.NT.Hw]}
inf: Empty section
inf: {Install Inf Section [BADDEVICE.Dev.NT.Hw] exit (0x00000000)}
dvi: {Writing Device Properties}
dvi: Provider name=Microsoft
dvi: DriverDate 06/21/2006
dvi: DriverVersion=6.0.6001.18000
dvi: Class name=USB
dvi: Manufacturer=(Standard USB Host Controller)
dvi: Matching DeviceID=usb\unknown
dvi: Strong Name=usb.inf:Generic.Section.NTx86:BADDEVICE.Dev:6.0.6001.18000:usb\unknown
dvi: {Writing Device Properties - Complete}
inf: {Install Inf Section [BADDEVICE.Dev.NT.Services]}
inf: AddService=,0x00000002 (usb.inf line 109)
! dvi: Add Service: NULL Controlling service.
inf: {Install Inf Section [BADDEVICE.Dev.NT.Services] exit(0x00000000)}
dvi: {Install DEVICE exit (0x00000000)}
dvi: Writing common driver property settings.
dvi: DriverDescription=Unknown Device
dvi: DeviceDisplayName=Unknown Device
dvi: Install Device: Restarting device. 11:31:20.949
dvi: Install Device: Restarting device completed. 11:31:21.321
dvi: Default installer: Exit
dvi: {DIF_INSTALLDEVICE - exit(0x00000000)} 11:31:21.322
dvi: {Build Driver List} 11:31:21.323
! dvi: Driver list already built
dvi: {Build Driver List - exit(0x00000000)} 11:31:21.324
dvi: {DIF_SELECTBESTCOMPATDRV} 11:31:21.324
dvi: No class installer for 'Unknown Device'
dvi: Default installer: Enter 11:31:21.330
dvi: {Select Best Driver}
dvi: Selected driver installs from section [BADDEVICE.Dev] in 'c:\windows\system32\driverstore\filerepository\usb.inf_98a6b4ed\usb.inf'.
dvi: Class GUID of device remains: {36fc9e60-c465-11cf-8056-444553540000}.
dvi: Set selected driver complete.
dvi: Selected:
dvi: Description - [Unknown Device]
dvi: InfFile - [c:\windows\system32\driverstore\filerepository\usb.inf_98a6b4ed\usb.inf]
dvi: Section - [BADDEVICE.Dev]
dvi: Signer - [microsoft windows]
dvi: Rank - [0x0dff0000]
dvi: {Select Best Driver - exit(0x00000000)}
dvi: Default installer: Exit
dvi: {DIF_SELECTBESTCOMPATDRV - exit(0x00000000)} 11:31:21.335
dvi: {DIF_NEWDEVICEWIZARD_FINISHINSTALL} 11:31:21.335
dvi: No class installer for 'Unknown Device'
dvi: Default installer: Enter 11:31:21.335
dvi: Default installer: Exit
dvi: {DIF_NEWDEVICEWIZARD_FINISHINSTALL - exit(0xe000020e)} 11:31:21.336
ndv: Device install status=0x00000000
ndv: Performing device install final cleanup...
ndv: {Core Device Install - exit(0x00000000)}
ump: Server install process exited with code 0x00000000 11:31:21.341
<<< Section end 2011/03/18 11:31:21.342
<<< [Exit status: SUCCESS]
>>> [Device Install (DiShowUpdateDevice) - USB\VID_0000&PID_0000\5&C19C4F&0&2]
>>> Section start 2011/03/18 11:46:48.872
cmd: "C:\Windows\system32\mmc.exe" "C:\Windows\System32\devmgmt.msc" /S
dvi: {DIF_UPDATEDRIVER_UI} 11:46:48.872
dvi: No class installer for 'Unknown Device'
dvi: No CoInstallers found
dvi: Default installer: Enter 11:46:48.874
dvi: Default installer: Exit
dvi: {DIF_UPDATEDRIVER_UI - exit(0xe000020e)} 11:46:48.874
ndv: {Update Driver Software Wizard for USB\VID_0000&PID_0000\5&C19C4F&0&2}
inf: Opened PNF: 'C:\Windows\INF\usb.inf' ([strings.0409] <src=drvstore>)
ndv: {Update Driver Software Wizard exit(00000000)}
<<< Section end 2011/03/18 11:47:06.043
<<< [Exit status: SUCCESS]
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: Arduino Uno - Device Not Recognized
OK. That looks like it.
Please contact [email protected] for a replacement and reference this thread in your message.
Please contact [email protected] for a replacement and reference this thread in your message.
-
- Posts: 3
- Joined: Fri Mar 18, 2011 12:00 pm
Re: Arduino Uno - Device Not Recognized
Alright, thank you.
Is there anything I can do to prevent this error from occurring?
Is there anything I can do to prevent this error from occurring?
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: Arduino Uno - Device Not Recognized
Most likely the 8U2 programming was not successful. Adafruit will refer this to the Arduino team to help improve the manufacturing process.
-
- Posts: 12151
- Joined: Thu Apr 06, 2006 4:21 pm
Re: Arduino Uno - Device Not Recognized
we're in communication with the team and they are investigating!
- freiguy1
- Posts: 2
- Joined: Thu Oct 13, 2011 12:04 am
Re: Arduino Uno - Device Not Recognized
I manually reprogrammed the 8U2 using the USBtinyISP.
Also, I blogged about here:
http://blog.ethanfrei.com/2011/10/ardui ... vived.html
Check it out!
Also, I blogged about here:
http://blog.ethanfrei.com/2011/10/ardui ... vived.html
Check it out!
-
- Posts: 1
- Joined: Tue Mar 06, 2012 3:28 pm
Re: Arduino Uno - Device Not Recognized
My new Uno board doesn't come up, even after swapping in a SECOND ATMEGA328-P module that I purchased from Adafruit just "in case."
The problem appears to be another case of the ATMEGA328 module not being programmed, per other forum entries.
Below are my symptoms. Please advise if it could be something I'm doing wrong.
1. This is what setupapi.dev.log reports (No class installer for 'Unknown driver software package')
>>> [Device Install (DiShowUpdateDevice) - USB\VID_2341&PID_0043\7493430303035121F041]
>>> Section start 2012/03/14 12:09:35.455
cmd: "C:\Windows\system32\mmc.exe" C:\Windows\system32\devmgmt.msc
dvi: {DIF_UPDATEDRIVER_UI} 12:09:35.460
dvi: No class installer for 'Unknown driver software package'
dvi: Default installer: Enter 12:09:35.469
dvi: Default installer: Exit
dvi: {DIF_UPDATEDRIVER_UI - exit(0xe000020e)} 12:09:35.480
ndv: {Update Driver Software Wizard for USB\VID_2341&PID_0043\7493430303035121F041}
ndv: {Update Driver Software Wizard exit(00000000)}
<<< Section end 2012/03/14 12:09:48.600
<<< [Exit status: SUCCESS]
2. The Arduino software (Arduino.exe) has the "Tools/Serial Port" item dimmed, indicating it didn't find the module.
Thanks in advance...
The problem appears to be another case of the ATMEGA328 module not being programmed, per other forum entries.
Below are my symptoms. Please advise if it could be something I'm doing wrong.
1. This is what setupapi.dev.log reports (No class installer for 'Unknown driver software package')
>>> [Device Install (DiShowUpdateDevice) - USB\VID_2341&PID_0043\7493430303035121F041]
>>> Section start 2012/03/14 12:09:35.455
cmd: "C:\Windows\system32\mmc.exe" C:\Windows\system32\devmgmt.msc
dvi: {DIF_UPDATEDRIVER_UI} 12:09:35.460
dvi: No class installer for 'Unknown driver software package'
dvi: Default installer: Enter 12:09:35.469
dvi: Default installer: Exit
dvi: {DIF_UPDATEDRIVER_UI - exit(0xe000020e)} 12:09:35.480
ndv: {Update Driver Software Wizard for USB\VID_2341&PID_0043\7493430303035121F041}
ndv: {Update Driver Software Wizard exit(00000000)}
<<< Section end 2012/03/14 12:09:48.600
<<< [Exit status: SUCCESS]
2. The Arduino software (Arduino.exe) has the "Tools/Serial Port" item dimmed, indicating it didn't find the module.
Thanks in advance...
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: Arduino Uno - Device Not Recognized
Windows does not ship with an UNO driver. You have to update the driver software manually.
Plug in your UNO, then check in Device Manager and look for it in "COM & LPT Ports" or "Other Devices". If it is there, you can update the driver software as described here: http://arduino.cc/it/Guide/Windows
Plug in your UNO, then check in Device Manager and look for it in "COM & LPT Ports" or "Other Devices". If it is there, you can update the driver software as described here: http://arduino.cc/it/Guide/Windows
-
- Posts: 1
- Joined: Mon Mar 19, 2012 10:15 pm
Re: Arduino Uno - Device Not Recognized
I had the same problem but found a solution. Go to the 'unknown device' in device manager. Open it's properties and select 'update driver'. Choose to browse for it, then select installed driver, then 'have disk'. Browse for the arduino installation directory and choose the 'arduino UNO.inf' driver in the drivers folder. Click through the rest of the promts and usual warnings about unsigned drivers. Voila.
-
- Posts: 1
- Joined: Tue Aug 21, 2012 8:58 pm
Re: Arduino Uno - Device Not Recognized
Mine was basically the same, my Arduino Uno worked fine with my old computer using Windows Vista 32-bit, but on my new laptop using either Windows 7 64-bit or Ubuntu 12.04 64-bit. The problem is though I can't even manually install the driver software like I did before because it is not showing up in the device manager on either OS.
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: Arduino Uno - Device Not Recognized
@JRob -
Nothing changes anyplace in the device manager when you plug in/unplug the UNO? Try a different cable, try a different USB port, try a powered hub, etc. There have been reports of problems with USB3.0 ports, as well.
Nothing changes anyplace in the device manager when you plug in/unplug the UNO? Try a different cable, try a different USB port, try a powered hub, etc. There have been reports of problems with USB3.0 ports, as well.
-
- Posts: 3
- Joined: Mon Feb 17, 2014 10:00 pm
Re: Arduino Uno - Device Not Recognized
I hope its okay to resurrect threads. I am having a similar issue. My main problem is that Arduino Micro does not appear ANYWHERE in the device manager. I obviously checked in Ports (COM) AND Other Devices (which doesnt even appear). It seems to be a driver related issue. I have uninstalled and re-installed arduino IDE 1.0.5 a few times and still cant get it to work. I have tried other computer and all usb ports on my pc tower.
Is there anything else I can try?
I appreciate the help.
Here is setupapi.dev data
Is there anything else I can try?
I appreciate the help.
Here is setupapi.dev data
Code: Select all
[Boot Session: 2014/01/26 21:57:06.493]
>>> [Setup Import Driver Package - c:\program files (x86)\arduino\drivers\arduino.inf]
>>> Section start 2014/01/30 17:42:54.240
cmd: "C:\Program Files (x86)\Arduino\drivers\dpinst-amd64.exe" /lm /sw /sa
inf: Provider: Arduino LLC (www.arduino.cc)
inf: Class GUID: {4D36E978-E325-11CE-BFC1-08002BE10318}
inf: Driver Version: 01/04/2013,1.0.0.0
inf: Catalog File: arduino.cat
sto: {Copy Driver Package: c:\program files (x86)\arduino\drivers\arduino.inf} 17:42:54.253
sto: Driver Package = c:\program files (x86)\arduino\drivers\arduino.inf
sto: Flags = 0x00000007
sto: Destination = C:\Users\AMAZO_~1\AppData\Local\Temp\{3a7d212c-76ec-5641-874e-d5615356360a}
sto: Copying driver package files to 'C:\Users\AMAZO_~1\AppData\Local\Temp\{3a7d212c-76ec-5641-874e-d5615356360a}'.
flq: Copying 'c:\program files (x86)\arduino\drivers\arduino.cat' to 'C:\Users\AMAZO_~1\AppData\Local\Temp\{3a7d212c-76ec-5641-874e-d5615356360a}\arduino.cat'.
flq: Copying 'c:\program files (x86)\arduino\drivers\arduino.inf' to 'C:\Users\AMAZO_~1\AppData\Local\Temp\{3a7d212c-76ec-5641-874e-d5615356360a}\arduino.inf'.
sto: {Copy Driver Package: exit(0x00000000)} 17:42:54.299
pol: {Driver package policy check} 17:42:54.546
pol: {Driver package policy check - exit(0x00000000)} 17:42:54.547
sto: {Stage Driver Package: C:\Users\AMAZO_~1\AppData\Local\Temp\{3a7d212c-76ec-5641-874e-d5615356360a}\arduino.inf} 17:42:54.549
inf: {Query Configurability: C:\Users\AMAZO_~1\AppData\Local\Temp\{3a7d212c-76ec-5641-874e-d5615356360a}\arduino.inf} 17:42:54.625
inf: Driver package 'arduino.inf' is configurable.
inf: {Query Configurability: exit(0x00000000)} 17:42:54.666
flq: Copying 'C:\Users\AMAZO_~1\AppData\Local\Temp\{3a7d212c-76ec-5641-874e-d5615356360a}\arduino.cat' to 'C:\Windows\System32\DriverStore\Temp\{192e38eb-0da7-5e40-91ba-552fdf03ed20}\arduino.cat'.
flq: Copying 'C:\Users\AMAZO_~1\AppData\Local\Temp\{3a7d212c-76ec-5641-874e-d5615356360a}\arduino.inf' to 'C:\Windows\System32\DriverStore\Temp\{192e38eb-0da7-5e40-91ba-552fdf03ed20}\arduino.inf'.
sto: {DRIVERSTORE IMPORT VALIDATE} 17:42:54.672
sig: {_VERIFY_FILE_SIGNATURE} 17:42:54.681
sig: Key = arduino.inf
sig: FilePath = C:\Windows\System32\DriverStore\Temp\{192e38eb-0da7-5e40-91ba-552fdf03ed20}\arduino.inf
sig: Catalog = C:\Windows\System32\DriverStore\Temp\{192e38eb-0da7-5e40-91ba-552fdf03ed20}\arduino.cat
! sig: Verifying file against specific (valid) catalog failed! (0x800b0109)
! sig: Error 0x800b0109: A certificate chain processed, but terminated in a root certificate which is not trusted by the trust provider.
sig: {_VERIFY_FILE_SIGNATURE exit(0x800b0109)} 17:42:54.698
sig: {_VERIFY_FILE_SIGNATURE} 17:42:54.698
sig: Key = arduino.inf
sig: FilePath = C:\Windows\System32\DriverStore\Temp\{192e38eb-0da7-5e40-91ba-552fdf03ed20}\arduino.inf
sig: Catalog = C:\Windows\System32\DriverStore\Temp\{192e38eb-0da7-5e40-91ba-552fdf03ed20}\arduino.cat
sig: Success: File is signed in Authenticode(tm) catalog.
sig: Error 0xe0000242: The publisher of an Authenticode(tm) signed catalog has not yet been established as trusted.
sig: {_VERIFY_FILE_SIGNATURE exit(0xe0000242)} 17:42:54.713
! sig: Driver package signer is unknown, but user trusts signer.
sig: Driver package certificate was successfully installed.
sto: {DRIVERSTORE IMPORT VALIDATE: exit(0x00000000)} 17:42:57.646
sig: Signer Score = 0x0F000000
sig: Signer Name = Arduino LLC
sto: {DRIVERSTORE IMPORT BEGIN} 17:42:57.647
sto: {DRIVERSTORE IMPORT BEGIN: exit(0x00000000)} 17:42:57.647
cpy: {Copy Directory: C:\Windows\System32\DriverStore\Temp\{192e38eb-0da7-5e40-91ba-552fdf03ed20}} 17:42:57.647
cpy: Target Path = C:\Windows\System32\DriverStore\FileRepository\arduino.inf_amd64_844213a156728dfe
cpy: {Copy Directory: exit(0x00000000)} 17:42:57.648
idb: {Register Driver Package: C:\Windows\System32\DriverStore\FileRepository\arduino.inf_amd64_844213a156728dfe\arduino.inf} 17:42:57.652
idb: Created driver package object 'arduino.inf_amd64_844213a156728dfe' in SYSTEM database node.
idb: Created driver INF file object 'oem22.inf' in SYSTEM database node.
idb: Registered driver package 'arduino.inf_amd64_844213a156728dfe' with 'oem22.inf'.
idb: {Register Driver Package: exit(0x00000000)} 17:42:57.655
idb: {Publish Driver Package: C:\Windows\System32\DriverStore\FileRepository\arduino.inf_amd64_844213a156728dfe\arduino.inf} 17:42:57.655
idb: Activating driver package 'arduino.inf_amd64_844213a156728dfe'.
cpy: Published 'arduino.inf_amd64_844213a156728dfe\arduino.inf' to 'oem22.inf'.
idb: Indexed 25 device IDs for 'arduino.inf_amd64_844213a156728dfe'.
idb: {Publish Driver Package: exit(0x00000000)} 17:42:57.659
sto: {DRIVERSTORE IMPORT END} 17:42:57.660
sig: Installed catalog 'arduino.cat' as 'oem22.cat'.
sto: {DRIVERSTORE IMPORT END: exit(0x00000000)} 17:42:57.701
sto: {Stage Driver Package: exit(0x00000000)} 17:42:57.702
<<< Section end 2014/01/30 17:42:57.708
<<< [Exit status: SUCCESS]
>>> [SetupCopyOEMInf - C:\Windows\System32\DriverStore\FileRepository\arduino.inf_amd64_844213a156728dfe\arduino.inf]
>>> Section start 2014/01/30 17:42:57.715
cmd: "C:\Program Files (x86)\Arduino\drivers\dpinst-amd64.exe" /lm /sw /sa
inf: Driver Store Path: C:\Windows\System32\DriverStore\FileRepository\arduino.inf_amd64_844213a156728dfe\arduino.inf
inf: Published Inf Path: C:\Windows\INF\oem22.inf
sig: Installing catalog arduino.cat as: oem22.CAT
<<< Section end 2014/01/30 17:42:57.817
<<< [Exit status: SUCCESS]
-
- Posts: 3
- Joined: Mon Feb 17, 2014 10:00 pm
Re: Arduino Uno - Device Not Recognized
I forgot to mention that the light is pulsing at first and then flashing 3 blinks in a row and then a pause. blink-blink-blink-largedelay-blink-blink-blink
Please be positive and constructive with your questions and comments.