Hello,
I am going through tutorial #3 and I am wondering how is the prototype shield secured onto the Arduino Board?
For example:
http://www.ladyada.net/images/arduino/led12shield.jpg
Mine keeps slipping off.
How to secure prototype shield?
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
-
- Posts: 12151
- Joined: Thu Apr 06, 2006 4:21 pm
Re: How to secure prototype shield?
do you mean the breadboard?
-
- Posts: 2
- Joined: Sat Apr 02, 2011 4:27 pm
Re: How to secure prototype shield?
No, not the breadboard. The breadboard can be connected to the prototype shield by removing the sticker cover under the breadboard.
This is what I am calling the prototype shield:
http://www.adafruit.com/index.php?main_ ... ucts_id=55
I want to know how it is connected to the Arduino as illustrated here:
http://www.adafruit.com/index.php?main_ ... cts_id=256
or
http://www.adafruit.com/index.php?main_ ... ucts_id=51
so that it does not fall off?
This is what I am calling the prototype shield:
http://www.adafruit.com/index.php?main_ ... ucts_id=55
I want to know how it is connected to the Arduino as illustrated here:
http://www.adafruit.com/index.php?main_ ... cts_id=256
or
http://www.adafruit.com/index.php?main_ ... ucts_id=51
so that it does not fall off?
- adafruit_support_bill
- Posts: 88155
- Joined: Sat Feb 07, 2009 10:11 am
Re: How to secure prototype shield?
There are header strips in the kit which solder to the bottom of the board. These plug into the Arduino headers.
http://www.ladyada.net/make/pshield/solder.html
http://www.ladyada.net/make/pshield/solder.html
Please be positive and constructive with your questions and comments.