Ultimate GPS for stratospheric Balloons

For other supported Arduino products from Adafruit: Shields, accessories, etc.

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
agassichan
 
Posts: 5
Joined: Fri Nov 23, 2012 11:05 am

Ultimate GPS for stratospheric Balloons

Post by agassichan »

Hello,

I would like to use your Ultimate GPS on stratospheric balloons.

I've read you've got fix up to 27km. Does this means that it didn't worked on higher altitudes, or the balloon didn't arrived higher than that?

Anyone used it up to 36km or similar?

Thanks for your help,

Jose Luis

User avatar
adafruit_support_bill
 
Posts: 88090
Joined: Sat Feb 07, 2009 10:11 am

Re: Ultimate GPS for stratospheric Balloons

Post by adafruit_support_bill »

I've read you've got fix up to 27km. Does this means that it didn't worked on higher altitudes, or the balloon didn't arrived higher than that?
That is the highest altitude we have a confirmed test for so far. The manufacturer has removed firmware limits on altitude for us.

adafruit
 
Posts: 12151
Joined: Thu Apr 06, 2006 4:21 pm

Re: Ultimate GPS for stratospheric Balloons

Post by adafruit »

Another person confirmed 102,998.69 feet! (31,394 meters)

agassichan
 
Posts: 5
Joined: Fri Nov 23, 2012 11:05 am

Re: Ultimate GPS for stratospheric Balloons

Post by agassichan »

Thanks for your help.

That means for us that is correctly working. Let's hope we can confirm something more close to 40km :D

agassichan
 
Posts: 5
Joined: Fri Nov 23, 2012 11:05 am

Re: Ultimate GPS for stratospheric Balloons

Post by agassichan »

Hello,

I've recently received a v3 version (1 week ago).

I've seen someone tested something and identified two different firmwares:

http://ukhas.org.uk/guides:adafruitugps

Mine, unfortunately is supposed to work only up to 27km, and this is not useful for me.

Is some way of flashing a new firmware?

User avatar
adafruit_support_bill
 
Posts: 88090
Joined: Sat Feb 07, 2009 10:11 am

Re: Ultimate GPS for stratospheric Balloons

Post by adafruit_support_bill »

These are pre-flashed at the factory. We do not have the facilities to re-flash them.

agassichan
 
Posts: 5
Joined: Fri Nov 23, 2012 11:05 am

Re: Ultimate GPS for stratospheric Balloons

Post by agassichan »

In future purchases, is there some way of getting the 40km altitude firmware?

User avatar
adafruit_support_bill
 
Posts: 88090
Joined: Sat Feb 07, 2009 10:11 am

Re: Ultimate GPS for stratospheric Balloons

Post by adafruit_support_bill »

I've recently received a v3 version (1 week ago).
Where did you get yours from? All current stock should be with the new firmware.

agassichan
 
Posts: 5
Joined: Fri Nov 23, 2012 11:05 am

Re: Ultimate GPS for stratospheric Balloons

Post by agassichan »

I've got it from your web store. Purchase order 225384. The tracking says it's not delivered, but I have it

adafruit
 
Posts: 12151
Joined: Thu Apr 06, 2006 4:21 pm

Re: Ultimate GPS for stratospheric Balloons

Post by adafruit »

Hi - there's a little bit of misinformation going on. We sent a beta test firmware out to a UK tester to verify it can do higher altitude. However, -no- GPS modules we sell have that firmware on it. We had requested from the factory that our next shipment come with the newer higher-altitude firmware but that shipment hasnt arrived yet. The only GPS with the new firmware is the one the beta tester received. Once we do get the next delivery, all the GPS modules we make will come with the new firmware. However, that is 2 or 3 weeks away at best.

It seems like that beta tester went ahead and wrote up about our test without alerting us, causing much confusion because he had the single test module and there is no way to upgrade current burned firmware with the new higher-alt firmware :(

you can email support@adafruit to get a refund for your GPS but please alert that website that we are not selling that firmware (yet) and to please not get people's hopes up until we do :) We will post on the blog when we get the new firmware in!

User avatar
mbodo
 
Posts: 7
Joined: Fri Apr 20, 2012 12:13 pm

Re: Ultimate GPS for stratospheric Balloons

Post by mbodo »

I noticed that your stock status of the Ultimate GPS was recently out-of-stock but is now in-stock. Does your current inventory of Ultimate GPS breakout boards contain the GPS firmware that enables use of the module at or above 40km altitude for high altitude balloon use?

User avatar
buton
 
Posts: 55
Joined: Fri May 11, 2012 8:06 am

Re: Ultimate GPS for stratospheric Balloons

Post by buton »

Same question, i just ordered one today ...

User avatar
adafruit_support_rick
 
Posts: 35092
Joined: Tue Mar 15, 2011 11:42 am

Re: Ultimate GPS for stratospheric Balloons

Post by adafruit_support_rick »

@mbodo, @buton -
I'm sorry, but the answer is no.

User avatar
mbodo
 
Posts: 7
Joined: Fri Apr 20, 2012 12:13 pm

Re: Ultimate GPS for stratospheric Balloons

Post by mbodo »

Do you have an updated eta when you will have the 40km firmware version in stock?

adafruit
 
Posts: 12151
Joined: Thu Apr 06, 2006 4:21 pm

Re: Ultimate GPS for stratospheric Balloons

Post by adafruit »

mbodo wrote:Do you have an updated eta when you will have the 40km firmware version in stock?
we do not.

Locked
Please be positive and constructive with your questions and comments.

Return to “Other Arduino products from Adafruit”