397 Camera with Mac OS X 10.6.8
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- drtmarshall
- Posts: 1
- Joined: Tue Dec 25, 2012 6:10 pm
397 Camera with Mac OS X 10.6.8
This is my first Arduino project so please excuse stupid questions. My question is What is the function of VC0706CommTool(EN) Setup V1-00.exe? Is there an equivalent for the MAc?
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: 397 Camera with Mac OS X 10.6.8
The Comm Tool allows you to adjust camera settings and control the camera from your PC. Unfortunately, there is no equivalent program for the Mac.
-
- Posts: 7
- Joined: Mon Mar 11, 2013 7:53 am
Re: 397 Camera with Mac OS X 10.6.8
Quick question as it is my first project as well, is there any other way of configuring the camera on a mac i.e. without the comm tool?
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: 397 Camera with Mac OS X 10.6.8
I don't know of anything, other than to run a Windows virtual machine.
However, you might try CodeWeavers Crossover. I've never tried it, and there's no guarantee it will run the VC0706 Comm Tool. But it's free to try, and you don't have to actually install Windows.
Post your results back here!
However, you might try CodeWeavers Crossover. I've never tried it, and there's no guarantee it will run the VC0706 Comm Tool. But it's free to try, and you don't have to actually install Windows.
Post your results back here!
Please be positive and constructive with your questions and comments.