Max31855 v2 ferrite bead replacement

[bheiss]

I have dammaged what seems to be one of the ferrite beads on the board. (element right of "Red")
With what can I replace the ferrite bead and/or what are the specification of the element, so that I can replace it ?

Schematics that I found on Github seem to be showing Max31855 V1 board ( https://github.com/adafruit/Adafruit-MA ... kout-board) without any beads.

Tx for your advise !

Encl.: v2 board with dammaged ferrite bead ?

[adafruit]

you can use any ferrite bead but a piece of wire will suffice as well, there's two beads and a capacitor - the capacitor is the most important part

[bheiss]

Tx !
Soldering a piece of wire instead of a bead solved my problem !

[h4wk3y]

Hello, please, can you write, which ferrite is really used in original - which parameters does it have?

Have the same problem as bheiss...

Thanks!

[adafruit_support_mike]

I think we're using 300 ohm 0805s right now, but the value isn't specified because it isn't critical, or even important.

[Talk2]

I know this is an old post, but for those looking for reference might look at Maxim Eval Board details, including schematic:

https://datasheets.maximintegrated.com/ ... 5EVKIT.pdf

Cheers