Weatherproof TTL Serial JPEG Camera with NTSC Video and IR LEDs
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_bill
- Posts: 88098
- Joined: Sat Feb 07, 2009 10:11 am
Re: Weatherproof TTL Serial JPEG Camera with NTSC Video and IR LEDs
If all the commands are timing out, then it is no surprise that you don't see any image. Post photos showing all of your connections.
-
- Posts: 12
- Joined: Wed Jan 16, 2013 7:23 pm
Re: Weatherproof TTL Serial JPEG Camera with NTSC Video and IR LEDs
See attachment for the connections.
- Attachments
-
- photo (13).JPG (272.81 KiB) Viewed 847 times
-
- Posts: 12
- Joined: Wed Jan 16, 2013 7:23 pm
Re: Weatherproof TTL Serial JPEG Camera with NTSC Video and IR LEDs
Hey, I have not heard from adafruit about connecting the camera.
- adafruit_support_bill
- Posts: 88098
- Joined: Sat Feb 07, 2009 10:11 am
Re: Weatherproof TTL Serial JPEG Camera with NTSC Video and IR LEDs
On the waterproof camera, the green wire (Rx) should be wired through the voltage divider.
-
- Posts: 12
- Joined: Wed Jan 16, 2013 7:23 pm
Re: Weatherproof TTL Serial JPEG Camera with NTSC Video and IR LEDs
Ok I got it. I connected the white on pin 2 and green on pin 3 and it works. However, I am now using the MEga 2560 with the sd card that I bought from Adafruit. I have already downloaded the library. I need some help, now that I have the camera working, do I need to make ay changes to the code if I am using the Mega instead of the arduino uno for the SD card.
- adafruit_support_bill
- Posts: 88098
- Joined: Sat Feb 07, 2009 10:11 am
Re: Weatherproof TTL Serial JPEG Camera with NTSC Video and IR LEDs
Are you using the Micro SD breakout board? http://www.adafruit.com/products/254
-
- Posts: 12
- Joined: Wed Jan 16, 2013 7:23 pm
Re: Weatherproof TTL Serial JPEG Camera with NTSC Video and IR LEDs
Ok, Got it thanks.
Please be positive and constructive with your questions and comments.